better than Anritsu 331L/331D Bird SA-6000EX siter master in stock

Specifications Bird SA-6000EX Site Master Analyzer for The communication base station

Bird SA-6000EX Site Master Analyzer, brand new with full

        better than Anritsu 331L/331D Bird SA-6000EX siter master in stock       Anita   Shenzhen Hontek Co., Ltd. Web: www.hontek.net Skype ID:anita.hsv Phone:0086-13798580405 Tel:0086-0755-36934393    Features and Benefits:  
• Frequency Range: 25 MHz to 6 GHz  • Rejects "On-Frequency" interference up to +13dBm 
• Maximum Input: +22 dBm  • Trace overlays to track performance over time 
• Saves 15 Calibrated Setups  • Stores 500 traces at 238 pts of resolution 
• Alphanumeric labeling of saved traces  • Color display is viewable in direct sunlight 
• Includes a Digital Power Meter option  Precision calibration components are recommended and required for accurate measurement 

Standard Accessories (Included): 
• AC/DC Power Cords, Manual • PC Tools Software, Battery, Soft Case      SA-6000EX (25 to 6000MHz) Site Analyzer from Bird Technologies is designed to test RF Power Measurements, VSWR Testing and Distance to Fault (DTF) estimation for the RF cable fault identification.
The Site Analyzer combines ease-of-use with powerful measurement and data analysis to help perform predictive maintenance. PC software allows download to PC to analyze data for long-term assessment of system trends, problems, and performance. No options are needed for power measurement, just purchase an In-Line 5010, 5012 or Terminating 5011 power sensor. A presentation highlighting site analyzers testing philosophy can be referred to for further details. In addition, there are a few white papers as well, which would assist you in enhancing your knowledge about cable, antenna tests performed by the industry.                
  SA-6000EX  

Altitude:	Up to 15,000 feet (4572 m)
Data Transfer:	9 pin-RS-232 (DB9), compatible with serial port
Dimensions:	10.5" x 8.4" x 3.3" (265 mm x 212 mm x 83 mm)
External AC:	90 to 264 Vac @ 45-66 Hz; AC/DC adapter required
External DC:	9-16 VDC fused, <3 A
Frequency Range:	25-6000 MHz
Frequency Resolution:	25 kHz; 25-800 Mhz, 50 kHz; 800-2500 MHz, 100 kHz; 2500-6000 MHz
Humidity:	95% ± 5% max. (non-condensing)
Immunity to Interfering Signals:	Rejects on-frequency signals up to +13 dBm
Impedance:	50 Ohms
Internal Time:	Rechargable Lithium-Ion batteries, 3 hour minimum operating time. Auto shut-off conserves battery life.
Maximum Input Signal:	+22 dBm
Operating Temp.:	-10°C to 50°C (14°F to 122°F)
Power Measurement:	Yes
Return Loss:	0 to -60 dB
Setup Storage Capacity:	15 Set-Ups/(500) 238 point traces
Speed:	1 multi-frequency scan (238 points)/2 seconds; 1 multi-frequency scan (475 points)/3.5 seconds; 1 multi-frequency scan (949 points)/6 seconds
Storage Temperature:	-40°C to 80°C (-40°F to 176°F)
Test Port:	N-type female connector
Trace Resolution:	238 (default), 475, or 949 per trace
Upgradeable:	No
Weight:	5.5 lbs. (2.5 kg)

    Inquire us! we will provide more detail product information,professional suggestion according to your situation!!! Anita Shenzhen Hontek Co., Ltd. Web: www.hontek.net Tel:0086-0755-36934393   Our main products as below:   1. FUSION SPLICER: Sumitomo (Type-81C/39/-66/); Fujikura (fsm-60S/60R); Fitel S178A; HSV-6000 2.OTDR: EXFO (FTB-1/AXS-110/AXS-100/ FTB-200/FTB-500); JDSU (MTS-2000/4000/6000/8000); YOKOGAWA (AQ7275) 3. POWER METER (PPM-350c, FPM-300, HSV300-P); LIGHT SOURCE (FLS-300, HSV300-L); VFL (FLS-241, HSV-321); Multi Loss tester (FOT-930, FOT-302) 4. Anritsu site master S331D, S331L, S331E,S332E. 5. Fiber cleaver (CT-30A/FC-6S), adapter, battery, electrode, connector, fiber tool kits 6. Fiber cable, patch cord, adapter, closure, pigtail, optical switch, patch panel, etc.. 7.Maintainance and repair ,calibration service for the EXFO, Sumitomo, Fujikura, Anritsu.