Heat Shrinkable Fiber Optic Splice Protector

Specifications Heat Shrinkable Fiber Optic Splice Protector

production cycle time: 2 days

according to your needs

Heat Shrinkable Fiber Optic Splice Protector                contact information Nancy Liu Viber / Tel : +86 15118174252 skype:   nancy.hsv                       Product Description Application:
BH-FSP single heat shrinkable fiber optic splice protector is consist of cross linked
Polyolefin, hot fusion tubing and stainless reinforcing steel rod, keep optic transmission properties of optical fiber, provide strength and protection to optical fiber splices.

Features:
1) Easily use and avoid any damaged to the optical fiber during installation;
2) Clear sleeve make it easy to detect splice before shrinkage;
3) Sealing structure make the splice free from effect of temperature and humidity
From environment;
4) Operating temperature: -45° C to +100° C;
5) Minimum fully recovery temperature: 120° C;
6) Colors: Transparent, other colors available on request.  
    Technical Data :  

Properties	Test Method	Typical Data
Tensile Strength(MPa)	ASTM D 2671	18
Ultimate Elongation(%)	ASTM D 2671	700
Density(g/cm2)	ISO R1183D	0.94
Dielectric Strength (KV/mm)	IEC 243	20
Dielectric Constant	IEC 243	2.5
Longitudinal Change(%)	ASTM D 2671	+5

      Dimension :  

PN	Steel Rod		Fusion Tube		Heat Shrink Tube	Device
	O.D.	Length	I.D.	Length	Length	O.D. (after shrink)
	(mm)	(mm)	(mm)	(mm)	(mm)	(mm)
APD-450501	0.5*45mm	45±1	0.5±0.1	45±1	45±1	1.6±0.1
APD-450801	0.8*45mm	45±1	1.1±0.1	45±1	45±1	2.0±0.1
APD-451001	1.0*45mm	45±1	1.1±0.1	45±1	45±1	2.3±0.1
APD-451201	1.2*45mm	45±1	1.3±0.1	45±1	45±1	2.5±0.1

          We also provide fusion splicer : Fujikura,  Sumitomo, Fitel, Comway and related accessories : battery, electrodes, cutter, battery charger cable, stripper           Fujikura  battery           Sumitomo electrodes       Fujikura cutter CT-06       Stripper                             Our Main Products   1. FUSION SPLICER: Comway C10; Sumitomo (T-81C); Fujikura (FSM-80S/70S/70R); Fitel S178A; INNO IFS 10 2.OTDR: EXFO (FTB-1/AXS-110/AXS-100/ FTB-200/FTB-500); JDSU (MTS-2000/4000/6000/8000); YOKOGAWA (AQ1200/AQ7275) 3. POWER METER (PPM-350C, FPM-300, HSV-300P); LIGHT SOURCE (FLS-300, HSV-300L); VFL (FLS-241, HSV-321); Multi Loss tester (FOT-930, FOT-302) 4. Anritsu site master S331D, S331L, S331E, S332E. 5. Fiber cleaver (CT-30A/CT-30/CT-05/FC-6S), adapter, battery, electrode, connector, fiber tool kits 6. Fiber cable, patch cord, adapter, closure, pigtail, optical switch, patch panel, etc.. 7.Maintainance and repair, calibration service for the EXFO, JDSU, Sumitomo, Fujikura, Anritsu