zhengji LED strip RF controller LED lighting RGB controller

Specifications 1.zhengji LED strip RF controller LED lighting RGB controller

2.RF 8key

3.Wall mounted

4.Output: 3channel

5.Panel remote

zhengji LED strip RF controller LED lighting RGB controller Technical Parameters    Working temperature: -20-60 °C  Supply voltage: DC5V, 12V ,18V, 24V  Output: 3 channels  Connecting mode: common anode  External dimension: L121ΧW53ΧH25 mm  Packing size: L150ΧW76ΧH51 mm  Net weight:255g Gross weight:285g Static power consumption: <1W Output current: <4A(each channel) Output power: 5V:<60W, 12V:<144W, 24V:<288W         Interface Specifications     Power inputinterface:       Adopt two sheath wires as connecting wires, meanwhile,brown wire→ + blue wire→ -   Load outputinterface:     Adopt four sheath wires as connecting wires,meanwhile,black wire→ + brown wire→R   yellow wire→G blue wire→B     Direction for use   Connect the load wire at first,following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power; Adopt film button and RF for controlling,there are 8 buttons in all, the funtion of each key as follows:   (1): you could turn on/off controller at any time;   (2): Play/pause button,it is convenient for you to see the static effection of led;   S(3)+: The step of the speed change add 1 by each pressing;   S-(4): The step of the speed change subtract 1 by each pressing;   B+(5): A brightness control button,the step of the brightness add 1 by each pressing;   B-(6): The step of the brightness subtract 1 by each pressing;   M+(7): The NO. of patterns add 1 by each pressing;(refer to the following form)   M-(8): The NO. of patterns subtract 1 by each pressing;   Packing:   1pc in white box, White box:  L150xW102xH57mm 50pcs/carton, carton size:L20.5'*W11.8'*H13'/1.82'   ...