Light switch LED touch controller wall mount control dimmer

Specifications Light switch LED touch controller

1.led touch dimmer

2.output power:12V<108W,24V<216W

3.3channels

4,CE RoHS

 Light switch LED touch controller      Technical Parameters    Working temperature: -20-60 °C   Supply voltage: DC12~24V   Output:4 channels  Connection mode:common anode  External dimension: L86ΧW86ΧH32 mm  Packing size: L105ΧW105ΧH47 mm  Net weight:108.5g  Gross weight: 170g  Static power consumption: <1W Output current: <4A*3 Output power: 12V<192W, 24V<384W   External Dimension       .Interface Specifications:  
V. Function of Key A to Key I       Key I : On/Off         Key A: Back to the last cycle mode,total as 6types, Key B: Speed down in Dynamic mode, total as 100grade,Effective in RGB channel;  Brightness down in static mode; Key C: Speed up in Dynamic mode, total as 100 grades. Effective in RGB channel;  Brightness up in static mode; Key  D:   Next to the last cycle mode,total as 6types,  Key E: Static Red emitting works when touch E key in any state ; Brightness is  adjustable in this function ; Same as Key E Key F :  Static Green emitting works when touch E key in any state ; Brightness is  adjustable in this function ; Key G: Static Blue emitting works when touch E key in any state ; Brightness is  adjustable in this function ; Color ring: Any static color will emits as you touch the color on the color ring in any working state;   Dynamic changing mode as :   1. Gradual changing for R/G/B  color (Speed adjustable) 2. Strobe changing for R/G/B  color (Speed adjustable) 3. Jumping changing for R/G/B  color (Speed adjustable) 4. Gradual changing for seven color (Speed adjustable) 5. Strobe changing for sevencolor (Speed adjustable) 6. Jumping changing for seven  color (Speed adjustable)   Connecting:    Installation:   1.gently pry gaps in touch panel with  “---” style screwdriver,then you can slowly remove the panel.As follows: 2. remove the cable. Pull the locking of the cable transposon, and then you can slowly remove the cable.As follows: 3.Fix the base of controller in the 86×86 installation box (customers need to buy the installation box by themselves) on the wall with screws.As follows: 4.use your hand gently pull down the cable seat lock according to step 2, plug the cable into cable seat, press the lock, and mount the cable of panel on the base, as follows: 1.   2. 3.   Remark:   1. Connect the load wire at first, following connect the power wire; Before power on,pls  make sure all wire were connected correctly and no short circuit. 2.The range of supply voltage is DC12V~DC24V.Controller may be burned out once exceed the voltage ranges  3.For the panel is made of glass,pls gently install it. 4.Never overload.   Thanks  for looking over our  DC12-24V 8A touch panel led dimmer,Hot selling wall mounted single color touch panel led dimmer,looking forward your good news!   Packing & delivery:   1.Inner 1 touch panel controller outer color box 2.Sample order in 1-3days  Less than 30ps Mass order in 10-15days     ...