tube led 36w t8 1200mm

Specifications 1. Direct replacement without removing ballast

2. Electronic, Mechanical both work

3. 1600 lm

4. CE, RoHS

5. 3yrs warranty

9W LED TUBE LIGHT  (Frosted)   [1]Product Appearance    [A]   Built-in power supply voltage AC85-265 V input, frequency 50/60 Hz, constant current output efficiency > 87%, 0.97 > PFC, and stable performance.   [B]  Silicon wafer packaging SMD LED, Epistar chip, the color temperature range 2700-7000 K, the colour developing index Ra > 70.   [C]  # 6063 aluminum shell, flame retardant PC cover, the light transmittance > 92%, unique PCB circuit design, can replace the traditional fluorescent lamp brightness.   [D]  Fluorescent lamp without ultraviolet rays, LED flash, no frequency without noise, low power consumption, start, speed, seismic, belongs to the green lighting products.   [2]Shape Structure Shell Material:Aluminum Alloy+PC      Shell Color:Silvery white Weight:0.25Kg     [3]Parameter

Input Voltage	AC85~265V	Color Rendering Index	Ra>70
Freqency Range	50~60Hz	Beam Angle	>120°
Power Factor	>0.97	LED Reduction Rate	1~3% / 1,000Hrs
Power Efficiency	>87%	Color Temperature	2700~7000K
LED Power	8W	Working Temperature	-20°C~+45°C
Total Power	9W	IP Grade	IP62
luminous flux	750lm	Working Life-span	>35000H
Luminous Efficiency	90~100lm / W	LED QTY.	144PCS

    [4]Diagram of degradation for Luminous 1,The data above has been got at a temperature of 25 celsius degree and taking 1000 hours running by a nonstop way. 2,Degradation of luminous flux of LED lamps depends on environmental conditions. The higher the temperature, the longer the using time, the faster luminous flux drops.   [6]Illumination Distance/illuminance/Irradiated Area       Picture:         Aging Test:       QC & Labling: 
Package process  

    [8]Using and installing instructions a. Conventional Installation As the chart shows, LED lamp on both ends of the direct access to AC85-265 V within the scope of the voltage, frequency 50/60 Hz, after electrify tubes work normally. b. Replacing conventional fluorescent tube Replace traditional fluorescent lamp, need to take the rev. Hui is divided, then a short circuit, then LED lamp ballast can load fixtures are normal use. [1]Traditional fluorescent lamp by law     [2]LED by tube method   [2]LED by tube method     Installation only allow professional electrician operation, before you install please check lamps and lanterns for abnormal. Detailed Please press the installation process with the product description, correct wiring way, forbidden charged operation       WWW.HDSLED.COM WWW.HDSZM.COM