200w led light

Specifications 1.70W LED industrial pendant high bay light

2.100--277V

3.80-90lm/W

4.sample order accept paypal

5.working life>50000hr

70W LED High Bay Light description: [1]specialty: [A] Adopting integrated Chip as light source with high lighting efficiency(70`80LM/W) ,high CRI(Ra>80),good quality heat dissipation,low light degradation. [B]Aluminium alloy die cast sheel, good strength,high quality heat dissipation.anti corrosion and baking varnish surface,can be for outdoor using. [C]Make a dedicated luminous intensity distribution design via the aluminium reflector,there are two options for lighting distribution,one is for focusing,another is for divergencing. [D]Wide Input Voltage from 85V~265VAC,constant voltage constant current output,can start up at once,no flicker,lightning protection,PFC function available. [2] Shape Structure Shell Material: Aluminum Alloy   Shell Color: Black Weight:  3Kg   [3]Parameter  

Input Voltage	AC100~277V	Color Rendering Index	Ra>70
Freqency Range	50~60Hz	Beam Angle	40°
Power Factor	>0.95	LED Reduction Rate	1~3% / 1,000Hrs
Power Efficiency	>87%	Color Temperature	2700~7000K
ED Working Voltage	DC30~33V	Working Temperature	-20°C~+45°C
LED Power	70W	IP Grade	IP65
Total Power	600W	Working Life-span	>35000H
Luminous Efficiency	90lm / W	Power line	VDE  3×0.75mm2
Connect wire	Brown→L  Blue→N   Yellow or Green→G

      [4]Diagram of degradation for Luminous   1,The data above has been got at a temperature of 25 celsius degree and taking 1000 hours running by a nonstop way. 2,Degradation of luminous flux of LED lamps depends on environmental conditions. The higher the temperature, the longer the using time, the faster luminous flux drops. [5]Photomatric Data   [6]Illumination Distance/illuminance/Irradiated Area     [7]Packing specification Lamp Packing:(L)252×(W) 252×(H) 270mm    1PC/CTN     3.2Kg   Reflector Packing:(L)487×(W) 487×(H) 480mm  10PCS/CTN   4.0Kg   [8]Using and installing instructions A.Installation Procedure   As Picture No.1 Showed, Install reflector on the heat sink, wrest fixed screws very tightly As Picture No.2 Showed, Wrest hanger into top cap, wrest lock screw very tightly As Picture No.3 Showed, Wrest the non skid lock screw to proper position. As Picture No.4 Showed, Hang the lamp on the installation site,and screw down the non skid lock. As Picture No.5 Showed, Hang chaining of steel wire on another installation device.  As Picture No.6 Showed, Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on. Attentions:  Only professional electrician can install the lamp, please check the lamp very carefully before installation Please install the lamp follow up the installation procedure, make sure the screw has been wrested very tightly, the wires have been connected properly, .Please operate according to Product Instructions enclosed.