Portable Wireless WiFi Power Bank 4400mAh Capacity

Feature:


4400mAh of li-polymer battery, continuos working for 4 hours
Support the charge for Android panel computer, smart phone and other portable digital products
Support to share the flow of phone, easily to achieve muti-devices to share the phone flow
Support to share the access of WIFI hotspot for China Mobile, China Unicom and China Telecom
Support EVDO of HSPA/HSPA+, EVDO A/B and TD-SCDMA wireless network card
Support shutdown/boot-strap to charge these series of products
Support the automatic recognition access for ADSL, CATV broadband and automatic recognition switiching for the port of WAN/LAN. Mah capacity


Specification:


Wireless Standard: IEEE802.11b/g/n
Wireless Rate: 150Mbps
3G Mode: CDMA2000, WCDMA, TD-SCDMA
Battery Capacity: 4400/5200mAh Built in Polymer
Wireless Storage: Support Wireless Share from U disk, removable hard disk storage devices


Interface:

1× 10/100M LAN/WAN Port
1× USB 2.0 Port
1× MicroUSB Port


Button:

Mode Selector Switch
Battery Detection Button
Reset Button

Indicator:

System
Battery Level
LOGO Breathing Lights

Antenna: Built-in omni-directional antenna
Operation Mode: AP, 3G Router, Wireless Router
Wireless Security: 64/128-bit WEP, WPA/WPA2, WPA /WPA2-Personal (TKIP/AES)
Operating Temperature: 0° C~40° C (32° F~104° F)
Storage Temperature: -40° C~70° C (-40° F~158° F)
Relative Humidity: 10% ~ 90%, Non-condensing
Storage Humidity: 5%~95%, Non-condensing
Dimensions: 97(L)*45(W)*25(H)mm (L x W x H) 115g


User Guide:

How to Charge the potable charger.
Use the original adapter, USB cable and mini USB connector, to connect with the charger. It would begin to charge.

How to know the remain power.
Press the button, LED lights will turn on to indicate the remain power.

How to charge digital devices with the charger.
1. Choose the correct connector for the device.
2. Connect the charger and device with the connector and USB cable.
3. Keep pressing the button for 3 seconds, LED lights turn on, the charger begins to charge.
4. After charging, keep pressing the button for 3 seconds to turn off the charger,
5. Keep the units carefully for the future using.

Caution:

1. Pls read these instructions carefully as incorrect use of Li-ion batteries may lead to dangers such as overheating, fuming, catching fire.
2. Please charger the mobile charger completely before the first time using it.
3. Before charging the electric device, please confirm the voltage of the electric device.
4. Don't drop, knock, disassemble or attempt to repair the charger by yourself.
5. Don't immerse the charger in water or make it wet.
6. Don't expose the charger to a heat source as fire or heater,
7. Keep out of reach of children.
8. Don't use in the presence of flammable gas.