Keenpower Electronic Limited
Keenpower Electronic Limited
High Power GSM 3G Dual Band Signal Booster
  • High Power GSM 3G Dual Band Signal Booster
  • High Power GSM 3G Dual Band Signal Booster
  • High Power GSM 3G Dual Band Signal Booster
  • High Power GSM 3G Dual Band Signal Booster
  • High Power GSM 3G Dual Band Signal Booster
High Power GSM 3G Dual Band Signal Booster
High Power GSM 3G Dual Band Signal Booster
High Power GSM 3G Dual Band Signal Booster
High Power GSM 3G Dual Band Signal Booster
High Power GSM 3G Dual Band Signal Booster

High Power GSM 3G Dual Band Signal Booster

Payment Type:
L/C, T/T, Paypal, Money Gram, Western Union
Quantity:

Your message must be between 20 to 2000 characters

Contact Now
Basic Info
Basic Info
Place of Origin: Shenzhen, China
Payment Type: L/C, T/T, Paypal, Money Gram, Western Union
Product Description
Product Description

Product Description

Why we should buy mobile signal repeater/ signal booster/ GSM WCDMA amplifier:

Cell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save somebody's life.
Unfortunately, there are still some places where one can find themselves "out of coverage". Usually those places are either too far from the cell phone base station or located inside underground constructions, for example:
· Parking lots, tunnels
· Big stores, office buildings
· Cars, boats etc.
· House in remote areas etc


How is mobile phone signal repeater GSM/DCS/ 2G/3G/4G WORKING?


The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone
Amplifier through the connection cable (coax).
After the signal is accepted by the phone amplifier, the device amplifies it.
Then this amplified signal goes through the connection cable (coax) to the inside antenna.
And after that, the amplified signal transmits to the cell phone.


Features of mobile phone signal amplifier

A. High-gain linear power amplifier
B. ALC and AGC function technology,
C. Ultra-low noise receive amplifier
D. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters,
E. Stable and reliable electromagnetic compatibility design.
F. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications
G. With full-duplex communication mode.
H. Dispel the heat effective reasonable, the structure is pretty, the volume is suitable.
Parameter data Uplink Downlink
Frequency Range 890-915/
1920-1980 MHz
935-960 MHZ
2110-2170 MHz
Output Power  20 ±2dBm 20 ±2dBm
Gain 65 dB 65dB
Bandwidth Wide Band
Automatic Gain Control >20dB
Ripple in Band ≤5dB
Intermodulation Products 9KHz~1GHz ≤ -36 dBm
1GHz~12.75GHz ≤ -30 dBm
Spurious Emission 9KHz~1GHz ≤ -36 dBm
1GHz~12.75GHz ≤ -30 dBm
Noise Figure @ max. gain ≤ 6 dB
VSWR ≤2
MTBF >50000 hours
Power Supply AC:90~265V, 50/ 60Hz;DC:12V 2A
Power Consumption < 20W
Impedance 50 ohm
Mechanical Specification
RF Connector N-Female
Cooling Heatsink Convection cooling
Dimensions (D x W xH ) 198*182*20 mm
Weight 1.2kg
Installation Type Wall Installation
Environment Conditions IP40
Humidity < 90%
Operating Temperature -10°C ~ 55°C

Send your message to this supplier

  • Mr. Rossen

  • Enter between 20 to 4,000 characters.

Related Keywords

Related Keywords