LED Tube Light T8 600mm 8W LED Tube

T8 LED tube series: 600mm(2FT), 900(3FT), 1200(4FT), 1500mm(5FT), 1800mm(6FT), 2400mm (8FT), SMD3528 or SMD3014, Voltage: AC 100-120V, AC220-240V, AC 85-265 V avaliable

LED Tube Light T8 600mm 8W led tube

Specification:
SMD3518 LED tube light 600mm 8W
Item: XHX-T806-8W
Power: 8 W (8W 10W aviable)
Replacement: 18W traditional tube
LED Qty: 140 LEDs SMD3528
Voltage: 85V/265V
Dimension: 26*600mm
Color: WW/CW/PW/R/G/B, dimmleoptional
Luminous Flux: 650LM +
Material: Aluminium + PC cover
Power Factor: > 0.9
Color Rendering Index: >80%
Beam Angle: >120 °
Life span: >50 000 Hrs

Features:
- Direct replacement for traditional tubes
- Long lifespan up to 50000hrs
- Work without ballast and less energy consumed
- Slow failure, minimum maintenance cost, the economic choice
- Low operating temperature, produce little heat, recyle without hazardous gasse and materials, green choice...
- Immediate start, no noise output, no humming and flickering, healthy and safe choice.
- Shock Resistant, much more durable than traditional light sources
- Rated to operate from -40° C to 40° C, perfect for environments with extreme climates

Usage Instruction:
A. When installing LED tube to the hanger with Inductive ballast:
1. Take out the starter from the hanger.
2. Take out the inductive ballast and connect the wire (Refer to the following drawing).
(The tube can work normally without this step. But it is strongly suggested for energy saving since the ballast may consume much power)
3. Install the LED tube into the hanger directly.
B. Installing LED tube to the hanger with Electronic ballast:
1. Take down the electronic ballast from the lamp hanger.
2. Connect the wire. (Refer to the following drawing)
3. Install the LED tube into the hanger directly.