Plate Cold Rolling Mill Machinery

Cold Rolling Mill Machinery , Industrial Steel Plate Slitting line

1. Main technical

2. Composed devices

Manual expand and shrink uncoiler (1 Unit)

1. Structure: four connection rods adjust manually and mechanically and the motor drives the steel coils doing uncoiling.

2. Specification: Φ520max/480min×1250(width of roller).

3. 7.5kw frequency conversion control to make sure the speed is adjustable and it is equipped with both passive and active uncoiling models.

4. The max capacity: 5T with simple supporting stand.

Storage pit 1

It should be done according to the foundation drawings.

Φ220×1250mm disc slitting machine (1 Unit)

1. Specification of blades: Φ220×Φ120×10, material: 9CrSi and 10 pieces of blades and a set of spacers and rubber board will be provided with the machine for free(Customers can extra purchasing of the blades as per the slitting numbers).

2. Thickness of processable material: δ=1.0mm.

3. Width of processable material: B≤1250.

4. Electric motor: 11KW frequency conversion control motor to control the speed.

5. The slitting machine is designed with entry guide device.

6. Slitting speed: v=30m/min.

Scrap winder

Storage pit 2

It should be done according to the foundation drawings.

First pre-dividing, and press device (1 Unit)

1. It is equipped with guiding and dividing devices after slitting.

2. It also designed with the tension press which is match to the recoiler and insure the even and tight quality of recoiler.

Φ510(MAX)×1350 mechanical recoiler (1 Unit)

1. Specification of shaft: mΦ510/470minx1350

2. Capacity: P≤5T with simple supporting stand

3. Motor: 22KW frequency conversion control motor

4. Speed: v=30m/min(average)

Second dividing and pressing device (1 unit)

1. This device cooperate with the recoiler to make sure the even quality and tight.

2. The spacers are 9CrSi alloy material with the quantity 15 pieces which will be separated on separated shafts.

Electrical control case (1 unit)

It controls the speed of the whole line. The main operation table can make the whole line change from high to low speed. And it can also make the plate into the machine manually.

About Us:

1. Main electric elements are Siemens / Schneider.

2. Have strong design team, experience engineers supply good service.

3. Solve your technical problems in 24 hours and provide international warranty service for engines.

4. Design the appearance form according to customers’ request.

5. More than 13 years professional production experience, the quality is reliable.

6. CE and FCC certification.

7. Punctual delivery.

8. Accept OEM and ODM requirements.

9. Accept testing before delivery.