high tensile Slope Stabilisation Mesh

1. wire diameter:3mm or 4mm
2. high tensile strength 1770Mpa
3. mesh size:103mm x 180mm
4. Mesh shape:diamond
5. Material:high tensile steel wire

1) rockfall Mesh Specification:

Mesh shape:diamond

Material:high tensible carbon steel

Wire strength:1770Mpa

Wire diameter:3mm

Corrosion protection:super coating

Coating:150g/m2

Mesh opening:103mm x 180mm

Breaking load of single wire:12.5KN

Tensile strength:110KN/m

2)Competitive Advantage:

1. Before development of the rockfall protection system In case of high static stress using stabilization systems with wire rope net cover

2. The rockfall protection system with the special high-tensile steel wire mesh can be used in high static stress !

3.Transportation convenient, easy to install

4.anti-corrosion

5. Reasonable construction of fast price

6. Don't need maintenance

3)Rockfall protection netting standard roll:

Mesh edges knotted

Roll width:1m - 3.5m

Roll length:10m or 30m

Hole size: G80 or G65

Weight:1.45kg/m2

4) Rockfall protection (tecco)system The installation is introduced :

rockfall protection system Also known as tecco system

ComponentsThe rockfall protection system

consists of four main components that are carefully coordinated with each other:

1). Rockfall protection netting(Tecco mesh)

Rockfall protection mesh is made of

high-tensile steel wire with an ultimate tensile strength of 1770 N/mm2.

2). Rockfall protection (tecco)system spike plates

Rigid spike plates that are reinforced with ribbing ensure optimal load transmission from soil or rock anchors

to the Rockfall mesh.

These plates are placed over the anchor heads and tightened to pre-tension the mesh onto the slope.

The plates are galvanized and have dimensions

of 13.0''*7.5"*0.4"(330mm*190mm*10mm).

3). Rockfall protection (tecco)system connection clips

The connection clips high-strength steel wire connection clips enable mesh sections to be

joined without overlapping and still guarantee one hundred percent transfer of forces.

These claw are hot dip galvanized and consist of 0.25"(6mm) thick steel spiral.

4). Soil or rock nails

Adapted to the local soil and rock static requirements,

the rockfall protection system(TECCO mesh) can be anchored in accordance with

our dimensioning concept with commercial soil or rock nails.

The main anchors of the system are installed in a grid typically from 6.6 to 13.1 ft (2.0 to 4.0m)

horizontal and vertical spacing.Actual spacing depends upon the results of site analysis and modeling.

Anchor consist of commercially available steel bars ranging from 1.0 to 1.25 ft (25 to 32mm).

Selfdrilling grout injection anchors are also permitted.Additional anchors may also

be used to provide added support at boundaries and in low points and hollows.

rockfall protection mesh

reinforcement mesh