380V Double Layer Roll Forming Machine with Alternating Cur
- Min. Order:
- 1
- Min. Order:
- 1
- Delivery Time:
- 30 Days
Your message must be between 20 to 2000 characters
Contact Now| Place of Origin: | China |
|---|
Double Layer Roll Forming Machine with Alternating Current Frequency Conversion
Application:
Double Layer Roll Forming Machine can separate produce corrugated roof and IBR roof in one line or similar two profiles.
The products are widely used in building the steel-structure large-scale warehouse, plants, supermarkets, shopping malls, trade markets, stadiums, holiday villages, sanatoriums, hotels, villas, residences, and different kinds of greenhouses.
Technical specification:
| Material Spec: | Colored Steel Sheet; Galvanized Steel Sheet |
| Thickness of Coil Sheet: | 0.3-0.8mm |
| Main Motor Power: | 5.5KW |
| Forming Speed: | 15-18M/MIN |
| Hydraulic Station Power: | 5.5 KW |
| Quantity of Stands: | 17 Stands |
| Hydraulic Pressure: | 10-12Mpa |
| Controlling System: | PLC |
| Index Error of Length: | 10M ± 2mm |
| Total Weight: | About 80000KGS |
| Voltage: | 380V 3 Phase 60Hz or At Buyers Requirement |
Consists:
This roll forming machine can separately produce corrugated roof and IBR roof in one line.
This line consists of 5 Ton Mechanical uncoiler, guiding and feeding device, DUAL LEVEL roll former, run out table, PLC controller, hydraulic post-cutting equipment, electrical control system, hydraulic system, etc.
Advantage:
available for two profiles roof panel shared one frame, save the cost.
double forming machine
1) Used to produce different roof panels and wall panels
2) Produced panels have such advantages as below:
a) Fine profile
b) Attractive color
c) Agile connecting
d) Slightly curved
3) dual-level roll forming machine
4) We can design and manufacture different type of it to hit your particular profiles
Drawings for refer:
