60Hz 3 Phase Double Layer Roll Forming Machine for Roof Pan
- Min. Order:
- 1
- Min. Order:
- 1
- Delivery Time:
- 30 Days
Your message must be between 20 to 2000 characters
Contact Now| Place of Origin: | China |
|---|
60Hz , 3 Phase Double Layer Roll Forming Machine for Roof Panels
Application:
Double Layer Roll Forming Machine can separate produce corrugated roof and IBR roof in one line or similar two profiles.
The products are widely used in building the steel-structure large-scale warehouse, plants, supermarkets, shopping malls, trade markets, stadiums, holiday villages, sanatoriums, hotels, villas, residences, and different kinds of greenhouses.
Advantage:
available for two profiles roof panel shared one frame, save the cost.
Technical Parameters:
| Material Spec: | Colored Steel Sheet; Galvanized Steel Sheet |
| Thickness of Coil Sheet: | 0.3-0.8mm |
| Motor Power: | 5.5KW |
| Forming Speed: | 15-18M/MIN |
| Hydraulic Station Power: | 5.5 KW |
| Quantity of Stands: | 17 Stands |
| Index Error of Length: | 10M ± 2mm |
| Hydraulic Pressure: | 10-12Mpa |
| Controlling System: | PLC |
| Total Weight: | About 80000KGS |
| Voltage: | 380V 3 Phase 60Hz or At Buyers Requirement |
Consists:
This roll forming machine can separately produce corrugated roof and IBR roof in one line.
Automatically cut to length, PLC control, alternating Current Frequency Conversion.
This line consists of
a) 5 Ton Mechanical uncoiler
b) guiding and feeding device
c) roll former
d) run out table
e) PLC controller
f) hydraulic post-cutting equipment
g) electrical control system, hydraulic system, etc.
