IEC60065 Figure11 UL Plug Socket Tester Socket Outlet Torque Test Machine
- Payment Type:
- T/T, Western Union
- Incoterm:
- FOB
- Min. Order:
- 1 Set/Sets
- Min. Order:
- 1 Set/Sets
- Delivery Time:
- 5 Days
- Transportation:
- Ocean, Land, express
Your message must be between 20 to 2000 characters
Contact Now| Place of Origin: | China |
|---|---|
| Productivity: | 1000sets /month |
| Supply Ability: | 1000sets /month |
| Payment Type: | T/T,Western Union |
| Incoterm: | FOB |
| Transportation: | Ocean,Land,express |
Figure 11 IEC60065 Figure 11 UL Plug Socket Tester Socket Outlet Torque Test Machine
Product information:
The plug torque tester conforms to the standard of IEC60065 figure 11. It is used for checking whether the mechanical stress which occurs when the Direct Plug-in Equipment with plug pin normally insert into the socket is in the required range.
A
device provided with pins intended to be introduced into fixed
socket-outlets shall not impose undue strain on these socket-outlets.
The balancing arm of the test apparatus pivots about a horizontal axis
through the centre lines of the contact tubes of the socket-outlet at a
distance of 8 mm behind the engagement face of the socket-outlet.
With the device not in engagement, the balancing arm is in equilibrium,
the engagement face of the socket-outlet being in the vertical
position.
After the device has been engaged, the torque to be
applied to the socket-outlet to maintain its engagement face in the
vertical plane is determined by the position of a weight on the
balancing arm. The torque shall not exceed 0.25 Nm.
Technical parameters:
|
weight |
2.5N*1, 1N*1 |
|
Plug |
UL plug*1, Australia plug*1,all-purpose plug*1 |
|
Conforms to standard |
IEC60884,VDE0620,IEC60598,IEC60065Fig11 |
|
Arm of force |
0-200mm |
|
The distance from the contact surface and the Axis of the surface |
8mm |
Related Keywords
