DC 12V - 24V 3 channel RF Led Rgb Controller for lamp (433.

DC 12V - 24V 3 channel RF Led Rgb Controller for lamp (433.92 Mhz)

Technical parameters:

● Working temperature: -20-60 ℃
● Supply voltage: DC12V-24V
● Output: 3 channels
● Connectiing mode: common anode
● Transmission/Receiving frequency: 433.92 Mhz
● External dimension: L128 Χ W64 Χ H24 mm
● Packing size: L145 Χ W95 Χ H50mm
● Net weight: 185g
● Gross weight: 215g
● Static power consumption: <1 W
● Output current: <4 A (each channel)
● Output power: 5 V: <60W, 12V: <144W, 24V: <288W

Summarization

1. RF controller adopts the advanced micro control unit, it is used for controlling a variety of lamp whose source of light is LED.
2. For instance, point source of light, flexible light strip, wall washer lamp, glass curtain wall light and so on;
3. At the same time, it has many advantages such as convenient connection , simplicity to use and others.
4. According to the actual need of customers, it can carry out jumpy changing, gradual changing, stroboflash and other effects of change.

External Dimension

Direction for use:

1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;
2. Adopt RF control, there are four buttons altogether, and every key-press function is as follows:
3. Program: pattern key, lighting color will change if you press one time;
4. Speed up: to speed/ brightness up lighting color changing;
5. Speed down: to speed/ brightness down lighting color changing;
6. On/off: Power switch, you could turn on/off controller in any state.

Standard color changes as follows:

Typical Applications

Notice:

1. Power supply can insert to left DC interface of Controller and the Max input current is 5A.
2. If the current over 5A, please connect with right-hand + - channel