18 Watt 300mA 220 Volt Constant Current LED Driver EMC With
- Min. Order:
- 1
- Min. Order:
- 1
- Delivery Time:
- 30 Days
Your message must be between 20 to 2000 characters
Contact Now| Place of Origin: | China |
|---|
18 Watt 300mA 220 Volt Constant Current LED Driver EMC With 30V - 60V DC
Quick detail:
Power : 18W
Input:AC90-264V
Output:320mA 2~12V
Size: 90*30*20(mm)
Certificate: CE&ROHS
Warranty: 2 years
Features:
Universal AC input/Full range
Protections: Short circuit/OLP/OVP
Meet EMC standards
100% full load burn-in test
High efficiency,long life and high reliability
IP67 design for indoor and outdoor
12W 300mA 220 Volt Constant Current LED Driver EMC With 30V - 60V DC
Specifications:
| Model | HF-018-65-30-0A30 | |||
| Output | Dc Voltage | 30~60V±5% | ||
| Rated Current | 300mA | |||
| Rated Power | 18W | |||
| Ripple&Noise(Max) | 180mV | |||
| Current Tolerance | ±20mA | |||
| Setup,Rise Time | 100ms/220VAC | |||
| Hold Up Time(Typ.) | 80ms/220VAC | |||
| Input | Voltage Range | 90~264VAC | ||
| Frequency Range | 47~60Hz | |||
| Power Factor(Typ) | PF>0.5/220VAC | |||
| Efficiency(Typ) | 83% | |||
| Ac Current(Typ) | 0.25A/235V | |||
| Inrush Current(Typ) | Cold-start current 0.7A/235V | |||
| Protection | Short Circuit | Protection type:recovers automatically after fault conditions is removed | ||
| Overlaod | Overload protection@145~160%above peak rating | |||
| Over Temperature | protection typer:shut down o/p voltage.re-power on to recover | |||
| Environment | Working Temp | -30~ +60℃(Refer to output load derating curve) | ||
| Working Humidity | 20~90%RH no-condensing (Waterproof) | |||
| Storage Temp Humidity | -40~ +80℃,10~90%RH | |||
| Safety&Emc | Safety Standards | CE Mark(LVD),IP67 | ||
| Withstand Voltage | I/P-O/P:1.5KVAC IP-GND:1.5KVAC | |||
| Emc Test Standards |
EN 55015:2006; EN 61547:1995+A1:2000 ;EN 61000-3-2:2006; EN61000-3-2:1995+A2:2005 EN 61347-1:2008 EN 61347-2-13:2006 |
|||
| NOTE | 1.All parameters NOT specially mentioned are measured at 220VAC input,rated laod and 25℃ of ambient temperature. | |||
| 2.Ripple&noise are measured at 20MHz of bandwidth by using a12''twisted pair-wire terminated with a 0.1uf&10uf parallel capacitor. | ||||
| 3.Tolerance:includes set up tolerance,line regulation and load regulation. | ||||
Application:
It’s suitable for an extremely wide range of applications, including:
LED, CCTV camera;
Communications and security products;
LED Strip Lighting/ LED lamp / LED Light, LED / LCD display.
Quality assurance:
Delivery:
