E1 to Ethernet Interface Converter, Protocol Converter, 4E1, 8e1, 16E1 to Ethernet

Get Latest Price

Payment Type:: T/T, L/C or Western Union

Quantity:

Your message must be between 20 to 2000 characters

Contact Now

Basic Info

Payment Type:	T/T, L/C or Western Union

Product Description

Features:

C301 EOP 16E1/Ethernet converter realize Ethernet transparent transmission over 1 to 16E1 with maximum transmitting rate of 31.68Mbps
EOP adopts with international standard protocol (G.7041, G.7042, G.7043 and G.8040) at all layers and able to intercommunicate with other supplier's products followed the same standard
The device not only provide perfect alarm/status indication for E1 and Ethernet interface, but with senior management function such as Ethernet data traffic statistics
The device is with high integration, low power consumption, stable performance and easy to use

Transmission interface:

Realize Ethernet data transmission over 1 to 16E1
Supports auto delete the fault E1 channels (BER more than 1E-6 or a serious warning LOS/AIS/LOF or the signal loop back)
Auto-restore the use of E1 after eliminating the failure
- Ethernet interface:
  - Provides 4 maximum shared Ethernet interface, support VLAN division based on interface, in the line with IEEE 802.1Q standard
  - Provides 1024 pieces MAC address table, 5 minutes aging time
- Supported frame lengths:
  - Minimum: 64 bytes
  - Maximum: 1,916 bytes
- Management interface: supported trunk super terminal management or network management based on SNMP (optional)
- In-line with ITU-T standard:
  - GFP-F encapsulation suggestion G.7041
  - VCAT and LCAS suggestion G.7042
  - Ethernet to nxE1 map suggestion G.7043
  - Ethernet to E1 map suggestion G.8040
- General characteristics:
  - Power: 220V ± 20%, -36 to -72V
  - Power consumption: less than 10W
  - Environment temperatures: -5 to 50°C
  - Storage temperatures: -40 to 70°C

C301 EOP 16E1/Ethernet converter realize Ethernet transparent transmission over 1 to 16E1 with maximum transmitting rate of 31.68Mbps

EOP adopts with international standard protocol (G.7041, G.7042, G.7043 and G.8040) at all layers and able to intercommunicate with other supplier's products followed the same standard

The device not only provide perfect alarm/status indication for E1 and Ethernet interface, but with senior management function such as Ethernet data traffic statistics

The device is with high integration, low power consumption, stable performance and easy to use

Realize Ethernet data transmission over 1 to 16E1

Supports auto delete the fault E1 channels (BER more than 1E-6 or a serious warning LOS/AIS/LOF or the signal loop back)

Auto-restore the use of E1 after eliminating the failure

Ethernet interface:
- Provides 4 maximum shared Ethernet interface, support VLAN division based on interface, in the line with IEEE 802.1Q standard
- Provides 1024 pieces MAC address table, 5 minutes aging time
Supported frame lengths:
- Minimum: 64 bytes
- Maximum: 1,916 bytes
Management interface: supported trunk super terminal management or network management based on SNMP (optional)
In-line with ITU-T standard:
- GFP-F encapsulation suggestion G.7041
- VCAT and LCAS suggestion G.7042
- Ethernet to nxE1 map suggestion G.7043
- Ethernet to E1 map suggestion G.8040
General characteristics:
- Power: 220V ± 20%, -36 to -72V
- Power consumption: less than 10W
- Environment temperatures: -5 to 50°C
- Storage temperatures: -40 to 70°C

Ethernet interface:

Provides 4 maximum shared Ethernet interface, support VLAN division based on interface, in the line with IEEE 802.1Q standard
Provides 1024 pieces MAC address table, 5 minutes aging time

Supported frame lengths: