
Addressable Fire Alarm Control System with Less Than 324 Addresses and 120W AC Input Power
- Payment Type:
- 100% Payment in Advance
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
Payment Type: | 100% Payment in Advance |
---|
Product Description
Product Description
- JB-QBL-MN/300-100: 100 addresses
- JB-QBL-MN/300-200: 200 addresses
- JB-QBL-MN/300-324: 324 addresses
- JTY-GD-930: addressable photoelectric smoke detector
- JTW-ZD-920: addressable fixed temperature heat detector
- J-SAP-M-960: addressable manual call point
- SG-991: addressable hooter/horn
- JK-952: addressable input module
- KZJ-956: addressable output module
- CODER-F189: coder for setting address
- The MN/300 series is an economic, reliable, and user-friendlysystem
- The JB-QBL-MN/300 is a new type of analog fire alarm control panel which has 324 alarm control points (detectors and modules which are characterized by fully mixed coding, non-polarity and two buses)
- It complies with the provisions of both fire alarm control units (GB4717-2005) and automatic control system for fire protection (GB16806-2006)
- Capacity: 324 points (non-polarity, two wire bus, fully mixed coding)
- AC input voltage: 220V AC ± 20%, 50Hz
- AC input power: 120W
- DC power: 24V DC, 5.0Ah, two fully sealed maintenance-free12V/5.0Ah storage batteries connected in series
- The 24V DC power has a long-term constant output current of6A
- The 5V DC power has a long-term constant output current of4A
- Circuit bus: two-wire system
- Total length: d1500m
-
Voltage UL of the circuit bus:
- +20V dUL d+26V (when the DC power is operating)
- +24VdULd+26V (when the AC power is operating)
- System working conditions
- Temperature: -10 to +50
- Humidity: d95%
- Power supply: 220V AC/50Hz, 24V DC/6A
- Output contact capacity: 220V DC/1A, 27.6V DC/3A
- Size: 460 x 330 x 100mm
- See the specifications of detectors and modules for the specific technical parameters of the detectors, the interface module, the monitoring module and the control module
- +20V dUL d+26V (when the DC power is operating)
- +24VdULd+26V (when the AC power is operating)
Related Keywords
Related Keywords
You May Also Like
You May Also Like