Addressable Input Module, Connected with Detectors, Manual Call Points, Hooter/horns, and More

Get Latest Price

Payment Type:: 100% payment in advance

Quantity:

Your message must be between 20 to 2000 characters

Contact Now

Basic Info

Payment Type:	100% payment in advance

Product Description

Overview: The JK-952 Intelligent input module (AW-AIO2188-IN module for short) is used with JB-QBL-MN/300, a two-bus fire alarm control panel. It can be connected with a conventional smoke detector, a conventional heat detector, a conventional manual call point, a conventional hooter/horn and some other equipment. After the said equipment starts to operate, the alarm signal output will be sent by the AW-AIO2188-IN module to the fire alarm control panel through a signal bus to give a fire alarm

Features and Technical parameters:

Mode of operation: non-polar two-wire system
Quiescent current: less than 0.5mA (bus); less than 6mA (power line)
Action current: less than 2mA (bus); less than 15mA (power line)
Operation indicator: the inspection indicator will blink once about every 12 seconds in the inspection status or remain lit in the operation status
Operating environment: temperature: －10 to 50 deg. C; relative humidity: ≤95% (40 deg. C±2 deg. C, without condensation)
Terminal load: 4.7K resistance
External dimensions: 86 x 86 x 40(mm)
Weight: about 119g
Executive standard: GB16806-2006

Mode of operation: non-polar two-wire system

Quiescent current: less than 0.5mA (bus); less than 6mA (power line)

Action current: less than 2mA (bus); less than 15mA (power line)

Operation indicator: the inspection indicator will blink once about every 12 seconds in the inspection status or remain lit in the operation status

Operating environment: temperature: －10 to 50 deg. C; relative humidity: ≤95% (40 deg. C±2 deg. C, without condensation)

Terminal load: 4.7K resistance

External dimensions: 86 x 86 x 40(mm)

Weight: about 119g

Executive standard: GB16806-2006

Send your message to this supplier