60M 1X4 HDMI Extender/Splitter Over Dual Cat5e/6New

Get Latest Price

Payment Type:: Telegraphic Transfer in Advance (Advance TT, T/T)

Quantity:

Your message must be between 20 to 2000 characters

Contact Now

Basic Info

Payment Type:	Telegraphic Transfer in Advance (Advance TT, T/T)

Product Description

This extender can extend and connect one HD Source to four HD Displays or Projectors by eight pieces of cat5e/6 at the same time

The extending distance can reach 60m. This extender meets the needs of multi-route and low-cost HD Signal long distance transmission well

Our devices offer solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments

Features:

One HDMI input signal distribute and extender to four HD Displays by the eight pieces of cat5e/6, the shortest distance up to 60m
Supports 3D
Supports CEC
Supports video output: 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Audio format support : DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
LED status light: When power connected, the related LED light will go bright.
Use the standard AWG26 HDMI Cable and CAT5E/6 to make sure it can reach 60m
Support signal retiming
No loss of quality
Installs in minutes
Need DC5V/2A power supply(TX/RX)

Operating and connecting:

To use one piece of HDMI Cable to connect the HD Source with the HDMI input port of the extender,the HDMI Cable up to 15m.
To use two pieces of cat5e/6 for each distributed HDMI Signal to connect the sender and receive, thedistance between the sender and receiver most up to 60m
To use one HDMI Cable to connect the receiver HDMI port with the Display End, the HDMI cable up to
To connect the two powers at the receive and sender.

One HDMI input signal distribute and extender to four HD Displays by the eight pieces of cat5e/6, the shortest distance up to 60m

Supports 3D

Supports CEC

Supports video output: 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i

Audio format support : DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD

LED status light: When power connected, the related LED light will go bright.

Use the standard AWG26 HDMI Cable and CAT5E/6 to make sure it can reach 60m

Support signal retiming

No loss of quality

Installs in minutes

Need DC5V/2A power supply(TX/RX)

To use one piece of HDMI Cable to connect the HD Source with the HDMI input port of the extender,the HDMI Cable up to 15m.

To use two pieces of cat5e/6 for each distributed HDMI Signal to connect the sender and receive, thedistance between the sender and receiver most up to 60m

To use one HDMI Cable to connect the receiver HDMI port with the Display End, the HDMI cable up to

To connect the two powers at the receive and sender.

Send your message to this supplier

* From:
* To:

Mr. Xin
* Messages:

Enter between 20 to 4,000 characters.

Related Keywords