Multifunctional Car Jumper Starter 12,000mAh for Car Emergency Start and Portable Power Bank

Multifunctional Car Jumper Starter 12,000mAh for Car Emergency Start and Portable Power Bank

Get Latest Price

Payment Type:: T/T, L/C or Western Union

Quantity:

Your message must be between 20 to 2000 characters

Contact Now

Basic Info

Payment Type:	T/T, L/C or Western Union

Product Description

Features:

Phone charging voltage limiting protection circuit does not hurt the phone
12,000mAh high capacity polymer battery of high power, fast charging and low self-discharge cycle can be up to 1,000 times
Supports 12V car emergency start, portable lighting, and a variety of mobile phones, PSP, MP3/MP4 players
Accurate display of power (each light represents 20% of electricity)
Unique design of the anti-anti-charge, do not worry about burning batteries
Adapter is compatible with the latest Apple 5S
Low -25 ° C-60°C to start the car more than 25 times
Available for Pocket PC PDA, notebook computers and other products charging/power supply
This product is used in a variety of models to adapt to the car within 4.0 displacements, is the owner of the car within 4.0 displacements can rest assured purchase. 4.0 And above can buy two or more parallel
We have EU, UK, US plug for you to choose. Normally, we will send according to your country, if you have any special needs, please contact with me

Instructions for use:

Select the appropriate voltage and connector for the electronic device to charge/power supply
Press the switch to start charging when your device connected with EPOWER, if you unplug the cable, auto-sleep will start in one minute
Five lights will flash circularly during the charging by EPOWER and all lights will keep bright when your device is full-charged
During the charging for your device, LED lights indicate the balance power of built-in battery of EPOWER. Four lights indicate 80% balance, three lights indicate 60% balance, two lights indicate 40% balance and one light indicates 20% balance. The built-in battery is empty when all LED lights start to flash
Press the switch five seconds to start if you want to use LED for illumination and select the status (light, strobe, SOS, close) by pressing the switch to transform
Store the product in a cool and dry place and away direct sunlight

Special note:

To start 12V car, please make sure at least two LED lights of EPOWER are bright firstly, then connect the red battery clip to the battery positive (+) and black clip to the battery negative (-) and insert the plug into the EPOWER, finally turn the ignition switch to the START position. Once the car is started, please disconnect the plug and remove the battery clips immediately

Specifications:

Size: 160 * 75 * 28mm
Weight: 690g
Output: 5V/2A, 12V/2A, 19V/3.5A
Input: 12V/1A
Starting current: 200A
Peak current: 400A
Standard: GB/T18287-2000

Package contents:

Mobile power x 1pc
Cell phone adapter cable (4-in-1)

Phone charging voltage limiting protection circuit does not hurt the phone

12,000mAh high capacity polymer battery of high power, fast charging and low self-discharge cycle can be up to 1,000 times

Supports 12V car emergency start, portable lighting, and a variety of mobile phones, PSP, MP3/MP4 players

Accurate display of power (each light represents 20% of electricity)

Unique design of the anti-anti-charge, do not worry about burning batteries

Adapter is compatible with the latest Apple 5S

Low -25 ° C-60°C to start the car more than 25 times

Available for Pocket PC PDA, notebook computers and other products charging/power supply

This product is used in a variety of models to adapt to the car within 4.0 displacements, is the owner of the car within 4.0 displacements can rest assured purchase. 4.0 And above can buy two or more parallel

We have EU, UK, US plug for you to choose. Normally, we will send according to your country, if you have any special needs, please contact with me

Select the appropriate voltage and connector for the electronic device to charge/power supply

Press the switch to start charging when your device connected with EPOWER, if you unplug the cable, auto-sleep will start in one minute

Five lights will flash circularly during the charging by EPOWER and all lights will keep bright when your device is full-charged

During the charging for your device, LED lights indicate the balance power of built-in battery of EPOWER. Four lights indicate 80% balance, three lights indicate 60% balance, two lights indicate 40% balance and one light indicates 20% balance. The built-in battery is empty when all LED lights start to flash

Press the switch five seconds to start if you want to use LED for illumination and select the status (light, strobe, SOS, close) by pressing the switch to transform

Store the product in a cool and dry place and away direct sunlight

To start 12V car, please make sure at least two LED lights of EPOWER are bright firstly, then connect the red battery clip to the battery positive (+) and black clip to the battery negative (-) and insert the plug into the EPOWER, finally turn the ignition switch to the START position. Once the car is started, please disconnect the plug and remove the battery clips immediately

Size: 160 * 75 * 28mm

Weight: 690g

Output: 5V/2A, 12V/2A, 19V/3.5A

Input: 12V/1A

Starting current: 200A

Peak current: 400A

Standard: GB/T18287-2000

Mobile power x 1pc

Cell phone adapter cable (4-in-1)

Send your message to this supplier