1.25Gbps GBIC Optical Transceiver, 500m Reach

Get Latest Price

Payment Type:: Telegraphic Transfer in Advance (Advance TT, T/T)

Quantity:

Your message must be between 20 to 2000 characters

Contact Now

Basic Info

Payment Type:	Telegraphic Transfer in Advance (Advance TT, T/T)

Product Description

Features

Dual data-rate of 1.25Gbps/1.0625Gbps operation
850nm VCSEL laser and PIN photodetector
Duplex SC optical interface
Standard serial ID information compatible with SFF-8053
550m transmission with 50/125 µm MMF
275m transmission with 62.5/125 µm MMFaa
+3.3V/5V single power supply
RoHS Compliant
Operating case temperature: 0 to +70℃

Applications

Switch to Switch interface
Switched backplane applications
Router/Server interface
Other optical transmission systems

Description

The GBIC transceiver is high performance, cost effective module supporting dual data-rate of 1.25Gbps/1.0625Gbps 1.25Gbps/1.0625Gbps and from 500m transmission on 50/125 µm MMF
The transceiver consists of two sections: The transmitter section incorporates a VSCEL laser. And the receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier (TIA). All odules satisfy class I laser safety requirements
The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate degradation of the laser. Lossof signal (LOS) output is provided to indicate the loss of an input optical signal of receiver
The standard serial ID information Compatible with GBIC MSA describes the transceiver’s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the two-wire serial CMOS EEPROM protocol. For further information, please refer to SFF-8053
Absolute maximum ratings: Stress in excess of the maximum absolute ratings can cause permanent damage to the module

Dual data-rate of 1.25Gbps/1.0625Gbps operation

850nm VCSEL laser and PIN photodetector

Duplex SC optical interface

Standard serial ID information compatible with SFF-8053

550m transmission with 50/125 µm MMF

275m transmission with 62.5/125 µm MMFaa

+3.3V/5V single power supply

RoHS Compliant

Operating case temperature: 0 to +70℃

Switch to Switch interface

Switched backplane applications

Router/Server interface

Other optical transmission systems

The GBIC transceiver is high performance, cost effective module supporting dual data-rate of 1.25Gbps/1.0625Gbps 1.25Gbps/1.0625Gbps and from 500m transmission on 50/125 µm MMF

The transceiver consists of two sections: The transmitter section incorporates a VSCEL laser. And the receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier (TIA). All odules satisfy class I laser safety requirements

The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate degradation of the laser. Lossof signal (LOS) output is provided to indicate the loss of an input optical signal of receiver

The standard serial ID information Compatible with GBIC MSA describes the transceiver’s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the two-wire serial CMOS EEPROM protocol. For further information, please refer to SFF-8053

Absolute maximum ratings: Stress in excess of the maximum absolute ratings can cause permanent damage to the module

Send your message to this supplier

* From:
* To:

Ms. Dromaya
* Messages:

Enter between 20 to 4,000 characters.

Related Keywords