18W LED Panel Light with 2835 SMD, 3,200lm Lumen

Get Latest Price

Payment Type:: T/T, L/C

Quantity:

Your message must be between 20 to 2000 characters

Contact Now

Basic Info

Payment Type:	T/T, L/C

Product Description

Specifications:

LED source: 2835 SMD LED
Chip brand: Epistar
Housing materials: aluminum + light guide plate + diffusion plate
Power: 18W
Lumen: 3,200lm
LED quantity: 90 pieces
IP rate: IP44
CRI: >80Ra
Color temperature:
- Warm white: 3,000K
- Daylight white: 4,500K
- Cool white: 6,000K
Voltage: 85-265V AC
Usage area: 10 square meters
Beam angle: 150 degrees
Projection distance: <5m
Size (L x W x H): 225 x 225 x 20mm
Installation: embedded, ceiling mounted

Installation caution:

While installing the product, do not clash the surface of the product with anything solid or fall into the ground
That kind of action would cause damage to the product
The body of the light must be fasten enough and the naked part of power wire shall be protected by insulating materials to avoid accidents from happening
The light and its special design power supplier cannot touch with any liquids like water, otherwise it would lead to electric leakage and electric shock
The product is not allow to expose to high-temperature (65ºC above) and high-humidity (85% RH above) for long time
Make sure that the voltage in the socket is 220V with frequency of 50Hz, if the voltage is higher or lower it would deadly destroy the power supplier for the light

LED source: 2835 SMD LED

Chip brand: Epistar

Housing materials: aluminum + light guide plate + diffusion plate

Power: 18W

Lumen: 3,200lm

LED quantity: 90 pieces

IP rate: IP44

CRI: >80Ra

Color temperature:

Warm white: 3,000K
Daylight white: 4,500K
Cool white: 6,000K

Voltage: 85-265V AC

Usage area: 10 square meters

Beam angle: 150 degrees

Projection distance: <5m

Size (L x W x H): 225 x 225 x 20mm

Installation: embedded, ceiling mounted

Warm white: 3,000K

Daylight white: 4,500K

Cool white: 6,000K

While installing the product, do not clash the surface of the product with anything solid or fall into the ground

That kind of action would cause damage to the product

The body of the light must be fasten enough and the naked part of power wire shall be protected by insulating materials to avoid accidents from happening

The light and its special design power supplier cannot touch with any liquids like water, otherwise it would lead to electric leakage and electric shock

The product is not allow to expose to high-temperature (65ºC above) and high-humidity (85% RH above) for long time

Make sure that the voltage in the socket is 220V with frequency of 50Hz, if the voltage is higher or lower it would deadly destroy the power supplier for the light

Send your message to this supplier

* From:
* To:
* Messages:

Enter between 20 to 4,000 characters.

Related Keywords