Transistor IC Tester, MOS PNP NPN

Get Latest Price

Payment Type:: L/C, T/T, Western Union or PayPal

Quantity:

Your message must be between 20 to 2000 characters

Contact Now

Basic Info

Payment Type:	L/C, T/T, Western Union or PayPal

Product Description

Multifunction integrated circuit tester is a professional instrument designed for the first-line microelectronic engineering staff, maintenance staff

Different test mode can be selected 5v mode, 3.3v mode, auto mode can test 74HC series 74LS series, CD4000 series, HEF400 series, 4500 series, operational amplifiers, interface class chip, optocoupler transistor automatic identification regulator regulator value recognition, and so on

Built-in 13 kinds of various types of chip data model, the transistor data model more than 420 kinds, covering a majority of 24 feet or less common universal device, can significantly reduce the workload and improve work efficiency

Operating instructions:

Panel has 5 buttons are on the left, right, bottom, and enter keys
Next key is used to adjust the directory and change the model number, the or so key to move around the cursor options to change
Enter key for the switch machine and execute the test command
Gently open the battery cover, add a 9V laminated battery, and then close the battery cover
Press enter for more than 2 seconds can boot, boot automatically display the current battery voltage, when the voltage is lower than 7.5, please replace the battery, the low voltage will affect the reliability of the test result and protection automatic shutdown
Boot: enter key press 2 seconds then boot
Shutdown:
- In the off directory, press enter button to immediately shutdown
- In any directory, press enter button for more than 10 seconds then off
- In no operation after 60 seconds, automatic shutdown

Methods of devices placed:

Top of the chip alignment
Put the most left transistor three slot
A 13 foot alignment IC optocoupler
Voltage regulator tubes placed IC block 13 and 14 feet
Note: transistor display pin order from left to right and the corresponding IC block, 10 feet, 11 feet, 12 feet

Panel has 5 buttons are on the left, right, bottom, and enter keys

Next key is used to adjust the directory and change the model number, the or so key to move around the cursor options to change

Enter key for the switch machine and execute the test command

Gently open the battery cover, add a 9V laminated battery, and then close the battery cover

Press enter for more than 2 seconds can boot, boot automatically display the current battery voltage, when the voltage is lower than 7.5, please replace the battery, the low voltage will affect the reliability of the test result and protection automatic shutdown

Boot: enter key press 2 seconds then boot

Shutdown: