3 ohm VAMO V2 Variable Voltage Ecig Mods Electronic Cigaret

Power Supply:

I. Standard capacity: 3.7V 1 Piece battery, Double battery 7.4 V Shared.

Ii. Charge Methods: Remove the battery external charging.

1> Working Parameter:

I. Support 3 ohm -- 1.5 ohm load.

Ii. Electrostatic current: < 350 uA, typical for: 200 uA

Iii. Smoking current: < 3.2 A, allow maximum input working current for 5 A

V. With constant pressure constant power output functions. In a single cell voltage for full division, 3 ohm load output 6V. 1.5 ohm load output > 4.5 V. Double batteries 1.5 ohm load output 6V.

2> Basic Function

I. Power on reset:Screen flicker 3 times, after completion of the instant access to energy saving mode.

Ii. Time limit protection function: toke smoke time is more than 10 s, forced to close the output.

Iii. The battery voltage is lower than 3.2 V, or double cell below 6.4 V after smoking. Screen flicker display LOV character, in order to prompt should charge, right now banned output voltage

V. Normal smoke screen close

Product Performance:

1> Constant pressure constant power output, the output voltage is 3V--6V adjustable, 3--15W, adjustable, error +/- 0.1 V.

2> Three key operation, with 36 gear power optional.

3> Atomizer resistance measurement function. Can test atomizer actual resistance impedance.

4> Voltage display function, can display the current cell voltage and the output volta.

5> Enhanced product support RMS output functions.

6> Has the power display function, can detect output value, and in the LCD screen display.

7> Battery reverse connection protection function. When the battery positive and negative level when reverse connection control panel to be automatic into protection will not damage any element and battery

8> Low voltage alarm, when the voltage is lower than set voltage, prompt voltage is too low, so as to achieve the effect of protect battery

VAMO V2 , VAMO MOD, VAMD V2 MOD