Best Quality for BMW Icom A2+B+C Diagnostic & Programming Tool

Due to the old for BMW ICOM A module have problem in the cooling and protection design, The new ICOM A2 adopts the whole aluminum shell body, using aerial explosion-proof connector; And it use the joint connection line which similar to the for Mercedes-Benz COMPACT4 SDCONNECT.

2014 New B, M, W ICOM A2+B+C Diagnostic & Programming Tool without Software

For BMW ICOM A2+B+C Hardware Version: 1.32

ICOM-PF-CORE 3.10.42
ICOM-Boot: 01.20.00
ICOM-Application: 01.33.00

For BMW ICOM A2+B+C Functions:

A2 - OBD diagnostic supporting MOST, D-CAN and K-CAN protocols

B - diagnostic via most bus, and have connection to A-interface via USB connection.

C - 20-pin cable for old models.

For BMW ICOM A2+B+C Special Features Compared with B, M, W ICOM:

The modified B, M, W ICOM A2 for vehicles with OBD access receives a significantly more powerful processor and more storage capacity. Robust aluminium case will help to avoid damage when using in harsh environments.

To protect the most connector, the B, M, W ICOM B for vehicles with optical most access will be equipped with a soft cover made of rubber instead of the former plastic cap.

The B, M, W ICOM C for old series with a diagnostics socket will be additionally equipped with an approx. 20 cm long cable, which facilitates the connection of the B, M, W ICOM A2 and makes storage in the engine compartment easier.

For BMW ICOM A2+B+C supports B, M, W cars till 2014. Support B, M, W & MINI full system diagnosing and offline programming.

Requirement for External HDD:

Professional Win7 with 64bit
CPU I3 I5 I7 or above Processor
Memory 8GB

For BMW ICOM A2+B+C Package List:

1PC X for BMW ICOM A2 Interface
1PC X for BMW ICOM B Most
1PC X for BMW 20pin Cable
1PC X USB Cable
1PC X OBD2 Cable
1PC X LAN Cable

FAQ:

Q1: Is there any diagnostic equipment can do for BMW530 DA 2003? It is better in French
A1: Try to use the B, M, W ICOM A2

Q2: Does the B, M, W ICOM A2 have the installation manual?
A2: Inset the hard disk into the computer and input password B M W(There are no space. ), you'll find the installation manual.

Q3: B, M, W ICOM A2 (SP168-B) can do the B, M, W old car before 2000?
A3: You can do the old for BMW car, if the car can not be done, then try for a few more cars

Q4: 2014 New B, M, W ICOM A2 + B + C Diagnostic & Programming Tool (SP168-B) can be programmed to control template EGS?
A4: Yes The entire vehicle control unit can be programmed