Shenzhen Autostrong Instrument Co., Ltd.
Shenzhen Autostrong Instrument Co., Ltd.
IEC60529 Ipx Waterproof Tester Ipx3/Ipx4 Rain Oscillation Tube Tester
  • IEC60529 Ipx Waterproof Tester Ipx3/Ipx4 Rain Oscillation Tube Tester
IEC60529 Ipx Waterproof Tester Ipx3/Ipx4 Rain Oscillation Tube Tester

IEC60529 Ipx Waterproof Tester Ipx3/Ipx4 Rain Oscillation Tube Tester

Payment Type:
L/C, T/T, Paypal, Money Gram, Western Union
Quantity:

Your message must be between 20 to 2000 characters

Contact Now
Basic Info
Basic Info
Place of Origin: Shenzhen, China
Payment Type: L/C, T/T, Paypal, Money Gram, Western Union
Product Description
Product Description
IEC60529 IPX Waterproof Tester IPX3/IPX4 Rain Oscillation Tube Tester

1. Application:

For checking the protection against water with spray nozzle of 0, 4 mm bore are used to prove the degrees of protection for the second characteristic numerals 3 and 4 "Protection against Spraying Water" resp. "Protection against splashing Water".

A complete test unit comprises a set of oscillating tubes as accessories, the oscillating appliance with the drive and-in the case of larger oscillating tubes-the opposite bearing. The oscillating tubes are manufactured with orifice radii of 200 mm to 1600 mm with a progressive ratio of 200 mm.
According to IEC60529 figure 4, IEC60598 clause 9.2.5, IEC60947.

2. Standard Outfit:

1 oscillating appliance, with flanged shaft to screw on the oscillating tubes, height above floor 1400 mm, on request with a second flanged shaft as shown on figure,

1 drive by 750W servo motor, oscillating speed 60° /s, with frequency converter, swiveling angle sensor, swiveling angle limiting safety switch, electromagnetic brake, brake release switch, emergency stopping switch and watertight socket to connect a turntable,

1 water supply with fine filter to be cleaned by reverse flow, pressure regulator and pressure indicating instruments, adjustable flow regulating valve and flow indicating instrument, electromagnetic valve and rotary union to supply the water through the flanged shaft, prepared to connect a hose of nominal diameter 20 mm,
1 resp. 2 opposite bearings, with flanged shaft to screw on the oscillating tubes, wall fastening type, also available for floor fastening,

1 control system, with start and stop buttons, switches for water, oscillating drive and turntable drive, main switch and emergency stopping switch to be unlocked by key, rotary knob to adjust the swiveling angle infinitely from 60° To minimum 165° On either side of the vertical, feasibility to adjust the oscillating angle MID position, fuses and thermal excess current release.

Send your message to this supplier

  • Ms. Judy

  • Enter between 20 to 4,000 characters.

Related Keywords

Related Keywords