Glow Wire Tester IEC60695-2-10 (AUTO-ZRSA)

IEC60695-2-10 Glow Wire Tester (AUTO-ZRSA)

Introduction (glow-wire tester):

AUTOSTRONG glow wire flammability tester is used to determine the fire resistance by the fire hazard test, accordance with IEC60695-2-10, IEC60335, IEC60598 and other standards.

The ignition source is imitated by an electrically heated wire loop against which the sample is pressed with a constant force. A miniature jacket thermocouple serves as a sensor for the loop temperature.

The sample has to be fastened to a carriage on which, by means of a tensioning cord, a weight with a force of 1 N is effective in the direction of the wire loop. Scales enable the reading of the flame height and the depth of penetration. Approx 200 mm below the wire loop a board of pine wood, covered with a layer of tissue paper, is mounted. This device enables to judge the danger of a fire spreading through burning drops or glowing parts falling from the sample. The calibration is done with silver foil, when the foil melts, the measuring unit must indicate a temperature of 960 ° C.

Conform to: IEC60695-2-10. UL746A, IEC60335, IEC60598 etc.

Glow Wire Tester provided: AUTOSTRONG provide two kinds glow wire tester, one is with chamber and another is without chamber, please kindly contact with us for more details call: 86-15818665781