RS485/RS232 to 4-20mA/0-10V Ethernet Converter Module

Get Latest Price

Payment Type:: T/T, Paypal, Western Union

Quantity:

Your message must be between 20 to 2000 characters

Contact Now

Basic Info

Place of Origin:	Shenzhen
Payment Type:	T/T, Paypal, Western Union

Product Description

RS485/RS232 to 4-20mA/0-10V ethernet converter module (ISO DA O)
RS485/232 to 4-20ma/0-5V/0-10V/0-2.5V D-A Converter
ISO DA-O

General Parameters

(typical @ +25º C, Vs is 24VDC)
Outputs: Voltage / Current
Accuracy: 0.2%
Output Maladjustment: Current output ± 0.5 uA/º C, voltage output ± 0.1mV/C
Temperature Drift: ± 20 ppm/º C(± 30 ppm/º C, max)
Output Resistance: Current output 350Ω (4-20mA/0-20mA/0-± 20mA output)
Voltage output 10mA (0-5V/0-10V/0-± 5V output)
Communications
Protocol RS-485 or RS232 ASCII format, MODBUS
Baud Rates Software Selectable (300, 600, 1200, 2400, 4800, 9600, 19200, 38400bps)
Address (0~255) Software Selectable
Response Time: 100 ms, max
Operation Power Supply: +8~50VDC
Power Loss: <1.5W
Operation Temperature: - 45 ~ +80º C
Operation Humidity: 10 ~ 95% (non-condensing)
Storage Temperature: - 45 ~ +80º C
Storage Humidity: 10 ~ 95% (non-condensing)
Isolation Input/Output: 3KVDC, 1 minute, leak current: 1mA
Interface and power supply are common-ground.
Endure Impact Voltage: 3KVAC, 1.2/50us(peak value)
Mechanical Dimensions: 83 mm x 37 mm x 51 mm

Features:

Low cost. small size. analog signal output precision >0.2%. wide power supply range: 8 ~ 50VDC.
Converting RS-485/232 digital signal into standard analog signal output.
Can be remotely reconfigured for modules accuracy.
Signal output/ communication interface 3kVDC isolation.
High reliability. convenient to programme. easy to do installation and wiring.
Setting module address and baud rate. etc is available by programming
Realize remote acquisition by setting the host to read ISO DA data.
Support Modbus RTU communication protocol.

Applications:

Standard analog signal outputs.
Intelligent building control. security and engineering applications.
RS-232/485 industrial automation control system.
Industrial fields signal isolation and long-term transmission.
Debugging and controlling of equipment.
Remote transmission and signal restore of sensor signal.
Given industrial field data to an actuator.
Development of medical and industrial products.
4-20mA signal output.

Model selection guide:

Dimendions:

Function Block:

RS485/RS232 to 4-20mA/0-10V Ethernet Converter Module

Send your message to this supplier

* From:
* To:

Ms. Sunyuansz
* Messages:

Enter between 20 to 4,000 characters.

Related Keywords