
16-Channle Analog Signal RS232/RS485 Isolated a-D Converter with Modbus RTU (ISOAD 16 U(A)-)
- Payment Type:
- T/T, Paypal, Western Union
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
Place of Origin: | Shenzhen |
---|---|
Payment Type: | T/T, Paypal, Western Union |
Product Description
Product Description
16-channle Analog Signal RS232/RS485 Isolated A-D Converter with MODBUS RTU
Model selection
ISOAD16 U(A) -
U/A: Vin/Iin Communication interface
U1: 0-5V A1: 0-1mA 485: Output is RS-485 interface
U2: 0-10V A2: 0-10mA 232: Output is RS-232 interface
U3: 0-75mV A3: 0-20mA
U4: 0-2.5V A4: 4-20mA
U5: 0-± 5V A5: 0-± 1mA
U6: 0-± 10V A6: 0-± 10mA
U7: 0-± 100mV A7: 0-± 20mA
U8: Customized A8: Customized
Note: User could choose RS-485 or RS-232 output by the interface wiring jumper at the back of the product.
1: ISOAD16 A4-485 Means 4-20ma signal output, output is RS485 interface
2: ISOAD16 A7-232 Means 0-5V signal output, output is RS232 interface
ISOAD 16 A-D Converter General Parameters:
(typical @ +25º C, Vs @ 24VDC)
Input: Voltage / Current
Accuracy: @ +25º C as table 1
Nonlinearity: @ +25º C as table 1
Input imbalance: ± 0.1 uA/º C
Temperature Drift: ± 15 ppm/º C (± 30 ppm/º C, max)
Input load: 50Ω (4-20mA/0-20mA/0-± 20mA current input)
100Ω (0-10mA/0-± 10mA current input)
1KΩ (0-1mA/0-± 1mA current input)
>1MΩ (voltage input)
Band width: -3 dB 10 Hz
Switching rate: 2.5-30 KHz Sps
Common mode restraint (CMR): 120 dB(1kΩ Source Imbalance @ 50/60 Hz)
Normal mode restraint (NMR): 60 dB (1kΩ Source Imbalance @ 50/60 Hz)
Input terminal protection: Over-voltage/over current protection
Communications Protocol: RS-485 or RS-232 ASCII character protocol and standard MODBUS RTU communication protocol
Baud rate: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400bps, 57600, 115200bps, selectable
Address: 0~255, selectable
Response Time: 100 ms max
Operation Power Supply: +24VDC+-10%, internal anti-reverse & over-voltage protection
Watt consumption: <8W
Operation Temperature: - 45 ~ +80º C
Operation Humidity: 10 ~ 90% (non-condensing)
Storage Temperature: - 45 ~ +80º C
Storage Humidity: 10 ~ 95% (non-condensing)
Isolation withstand voltage: 3KVDC between input and output, 1 minute, stray current 1mA
Output and power are common-ground.
Endure Impact Voltage: 3KVAC, 1.2/50us(peak value)
Appearance & dimension: 158*87.5*59mm
Model selection
ISOAD16 U(A) -
U/A: Vin/Iin Communication interface
U1: 0-5V A1: 0-1mA 485: Output is RS-485 interface
U2: 0-10V A2: 0-10mA 232: Output is RS-232 interface
U3: 0-75mV A3: 0-20mA
U4: 0-2.5V A4: 4-20mA
U5: 0-± 5V A5: 0-± 1mA
U6: 0-± 10V A6: 0-± 10mA
U7: 0-± 100mV A7: 0-± 20mA
U8: Customized A8: Customized
Note: User could choose RS-485 or RS-232 output by the interface wiring jumper at the back of the product.
1: ISOAD16 A4-485 Means 4-20ma signal output, output is RS485 interface
2: ISOAD16 A7-232 Means 0-5V signal output, output is RS232 interface
ISOAD 16 A-D Converter General Parameters:
(typical @ +25º C, Vs @ 24VDC)
Input: Voltage / Current
Accuracy: @ +25º C as table 1
Nonlinearity: @ +25º C as table 1
Input imbalance: ± 0.1 uA/º C
Temperature Drift: ± 15 ppm/º C (± 30 ppm/º C, max)
Input load: 50Ω (4-20mA/0-20mA/0-± 20mA current input)
100Ω (0-10mA/0-± 10mA current input)
1KΩ (0-1mA/0-± 1mA current input)
>1MΩ (voltage input)
Band width: -3 dB 10 Hz
Switching rate: 2.5-30 KHz Sps
Common mode restraint (CMR): 120 dB(1kΩ Source Imbalance @ 50/60 Hz)
Normal mode restraint (NMR): 60 dB (1kΩ Source Imbalance @ 50/60 Hz)
Input terminal protection: Over-voltage/over current protection
Communications Protocol: RS-485 or RS-232 ASCII character protocol and standard MODBUS RTU communication protocol
Baud rate: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400bps, 57600, 115200bps, selectable
Address: 0~255, selectable
Response Time: 100 ms max
Operation Power Supply: +24VDC+-10%, internal anti-reverse & over-voltage protection
Watt consumption: <8W
Operation Temperature: - 45 ~ +80º C
Operation Humidity: 10 ~ 90% (non-condensing)
Storage Temperature: - 45 ~ +80º C
Storage Humidity: 10 ~ 95% (non-condensing)
Isolation withstand voltage: 3KVDC between input and output, 1 minute, stray current 1mA
Output and power are common-ground.
Endure Impact Voltage: 3KVAC, 1.2/50us(peak value)
Appearance & dimension: 158*87.5*59mm
Related Keywords
Related Keywords
You May Also Like
You May Also Like
-
2: 1 Wide Voltage Input Range DIP24 1kv Isolation Regualted Dual Output DC/DC Converter
16 Channels Analog Signal 4-20mA/0-5V to RS232/RS485 Isolated a-D Converter with Modbus RTU
2 Channels Isolation 0-20mA/4-20mA to RS485 or RS232 Converter (support Modbus RTU) Data Collector Acquisition (2-16channels is available)
2-Channel/4-Channel DC Current/Voltage to RS485/232 Converter a-D Converter Support Modbus RTU Data Acquisition with LED Display
2/4-Channel 0-75mv/0-5V/0-10V/4-20mA/0-20mA to RS232/RS485 Converter with LED Display