DC Voltage Curren Isolated Power Supply Transformer (ISOEM U(A)-P-O-S)

DC Voltage Curren Isolated Power Supply Transformer
Analog Active Signal Isolated Transmitter/Distributor

General parameter:

Compact SIP 12Pin, comply with UL94V-0 standard, flame retardant package.
External potentiometer, zero and gain adjustment is not required (Non-linearity <0.1%).
3KVDC Isolation among auxiliary power supply, signal input, output.
Auxiliary Power Supply: 5V, 12V, 15V, 24VDC, etc single power supply.
Power distribution in input end for function expansion: 5V, 12V, 15V, 24VDC, etc.
0-75mV/0-10V/0-1mA/4-20mA, etc analog signal isolationamplification and conversion.
Industrial operating temperature range: -40~+85º C
In EMC special situation, shielding measures and electro-magnetic rejection circuit are required.

Applications

Passive sensor isolated power distribution, signal acquisition & transmission.
Supply power for preamplifier, weighing bridge tocollect signals.
PLC, DCS analog signal isolation and dataacquisition.
DC current/voltage signal isolation, amplification and conversion.
Analog signal ground interference rejection anddata isolated acquisition.
Industrial site signal isolation and long-distance transmission.
Receiving and Transmitting the signals between meters& Instruments and sensors.
Electric monitoring, medical equipments isolated safety bar.
Specification:

SUNYUAN SIP12 Pin package ISOEM-S Series Analog Active Signal Isolated Transmitter/Distributor is a kind ofsignal module/ IC with electro-magnetic hybrid integrated circuit inside. There are one multi-isolation DC/DC transformation power and a set of electro-magnetic coupling analog signal isolated amplifier/transmitter in the IC. The transmitters mainly applied in the field without special requirements for EMC (electro-magnetic interference). And by employing internal isolation technique, proper I/O side creepage distance, the isolated voltage of that signal transmitter is up to 3000VDC.

ISO EM-S Series transmitter easily achieves the isolated conversion for the industrial site signals without gain/zero adjustment, external zero and without external gain adjustment potentiometers. The isolated power supply in input end can distribute power to displacement, resistance and other passive two-wire/three-wire sensors, and can also be used as pre-amplification in input end, amplification of weighing bridge, calibration, etc.

Precision grade: 0.1, 0.2.

0-5V/0-10V/0-75mV/0-2.5V/0-1mA/0-10mA/0-20mA/4-20mA, etc international standard signal input.

Output voltage signal: 0-2.5V/0-5V/0-10V/1-5V. Output current signal: 0-10mA/0-20mA/4-20mA, high load capacity.

Product Model Selection:

ISO EM U(A) -P- O- S

Signal Input

Current/Voltage

U1: 0-5V A1: 0— 1mA
U2: 0-10V A2: 0— 10mA
U3: 0-75mV A3: 0— 20mA
U4: 0-2.5V A4: 4— 20mA
U8: Customized A8: Customized

Auxiliary Power Supply

P1: DC24V P2: DC12V
P3: DC5V P4: DC15V
P8: Customized

Signal Output
O1: 4-20mA O2: 0-20mA S1: 9VDC S2: 15VDC
O4: 0-5V O5: 0-10V S3: 24VDC S4: 5VDC
O6: 1-5V O8: Customized S8: Customized

Isolated Distribution Power Supply
S1: 9VDC S2: 15VDC
S3: 24VDC S4: 5VDC
S8: Customized