DC Current or Voltage Signal Transmitter with Electromagnetic Isolation

DC Current or Voltage Signal Transmitter with electromagnetic isolation

ISOEM U(A)-P-O-S Series Converter/Transmitter General parameter:
Compact SIP 12Pin, comply with UL94V-0 standard, flame retardant package.
External potentiometer, zero and gain adjustment is not required (Non-linearity <0.1%).
3KVDC Isolation among auxiliary power supply, signal input, output.
Auxiliary Power Supply: 5V, 12V, 15V, 24VDC, etc single power supply.
Power distribution in input end for function expansion: 5V, 12V, 15V, 24VDC, etc.
0-75mV/0-10V/0-1mA/4-20mA, etc analog signal isolationamplification and conversion.
Industrial operating temperature range: -40~+85
In EMC special situation, shielding measures and electro-magnetic rejection circuit are required.

Applications
Passive sensor isolated power distribution, signal acquisition & transmission.
Supply power for preamplifier, weighing bridge tocollect signals.
PLC, DCS analog signal isolation and dataacquisition.
DC current/voltage signal isolation, amplification and conversion.
Analog signal ground interference rejection anddata isolated acquisition.
Industrial site signal isolation and long-distance transmission.
Receiving and Transmitting the signals between meters& Instruments and sensors.
Electric monitoring, medical equipments isolated safety bar.

Introduction:
SUNYUAN SIP12 Pin package ISOEM-S Series Analog Active Signal Isolated Transmitter/Distributor is a kind of signal module/ IC with electro-magnetic hybrid integrated circuit inside. There are one multi-isolation DC/DC transformation power and a set of electro-magnetic coupling analog signal isolated amplifier/transmitter in the IC. The transmitters mainly applied in the field without special requirements for EMC (electro-magnetic interference). And by employing internal isolation technique, proper I/O side creepage distance, the isolated voltage of that signal transmitter is up to 3000VDC.
ISO EM-S Series transmitter easily achieves the isolated conversion for the industrial site signals without gain/zero adjustment, external zero and without external gain adjustment potentiometers. The isolated power supply in input end can distribute power to displacement, resistance and other passive two-wire/three-wire sensors, and can also be used as pre-amplification in input end, amplification of weighing bridge, calibration, etc.
Precision grade: 0.1, 0.2.
0-5V/0-10V/0-75mV/0-2.5V/0-1mA/0-10mA/0-20mA/4-20mA, etc international standard signal input.
Output voltage signal: 0-2.5V/0-5V/0-10V/1-5V. Output current signal: 0-10mA/0-20mA/4-20mA, high load capacity.

Product Model Sellection:

ISO EM U(A) -P- O- S
Signal Input: Current/Voltage
U1: 0-5V A1: 0— 1mA
U2: 0-10V A2: 0— 10mA
U3: 0-75mV A3: 0— 20mA
U4: 0-2.5V A4: 4— 20mA
U8: Customized A8: Customized

Auxiliary Power Supply
P1: 24VDC P2: 12VDC
P3: 5VDC P4: 15VDC
P8: Customized

Signal Output
O1: 4-20mA O2: 0-20mA
O4: 0-5V O5: 0-10V
O6: 1-5V O8: Customized

Isolated Distribution Power Supply
S1: 9VDC
S2: 15VDC
S3: 24VDC
S4: 5VDC
S8: Customized

Model Sellection Example:
E. G. 1: Input signal: 0-5V, Output signal: 0-5V, Auxiliary Power Supply: 24VDC, Power Distribution: 15VDC
Product Model No: ISOEM U1-P1-O1-S2
E. G. 2: Input signal: 4-20mA, Output signal: 4-20mA, Auxiliary Power Supply: 24VDC, Power Distribution: 24VDC
Product Model No.: ISOEM A4-P1-O1-S3