Multi-Parameter Patient Monitor

Multi-Parameter Patient MonitorStandard configuration12.1 inch TFT; Resolution: 800*600Six parameters: ECG, SpO2, PR, NIBP, RESP, TEMPOptionLead-acid battery (built-in)Recorder (built-in)IBPETCO2Features12.1"TFT display, Resolution, 800*6006 display interface720 hours trend data storage, 12 hours waveform reviewSuitable for adult, pediatric and neonatal patientArrhythmia analysis, ST calculation, Pace analysisAnti-ESU, anti- defibrillatorVoice alarmSupport wired and wireless networkingStandard network interface, can connect to Central monitor systemTechnical parameters1. ECGLeads Mode: 5 leads: I\ II\ III\ AVR\ Avl\ Avf\ VGain(mm/mV): 1/4, 1/2, 1, 2, 4Scanning speed; 12.5mm/s, \25mm/s, \50mm/sFrequency response: Diagnosis 0.05-130HzMonitoring 0.5-40HzOperation 1.0- 20HzHeart rate range: 15-350 BPMHeart rate accuracy: ± 1%ST segment analysis: -0.8-+0.8MvST segment accuracy: ± 0.02Mv2. NIBPMeasure and Alarm RangeAdult ModeSYS 40 ~ 280 mmHgDIA 10 ~ 220 mmHgMEAN 20 ~ 240 mmHgPediatric ModeSYS 40 ~ 220 mmHgDIA 10 ~ 160 mmHgMEAN 20 ~ 170 mmHgNeonatal ModeSYS 40 ~ 135 mmHgDIA 10 ~ 100 mmHgMEAN 20 ~ 110 mmHgStatic pressure range: 0~300 mmHgStatic pressure accuracy: ± 3 mmHg or 2%Resolution: 1mmHgProtection mode: Dual over voltage protection3. SpO2Measure range: 1-100%Accuracy: ± 2% (70-100%)Resolution: 1%4. Pulse rateMeasure range: 20-300 BPMAccuracy: ± 2BPMResolution: 1BPM5. TemperatureChannel: 2Measure range: 0-50 celsius degreeAccuracy: ± 0.1 celsius degreeResolution: 0.1 celsius degree6. RespirationMeasure range: Adult 0~120BrPMPediatric/ Neonatal 0~150BrPMAccuracy: ± 2%Resolution: 1BPM7. IBP(optional)Accuracy (no sensor): ± 2% or1mmHgBand width: Normal mode: DC~40HzSmooth mode: DC~12.5Hz8. ETCO2(optional)Measure range: 0% - 13%Resolution: 1 mmHgAccuracy: ± 2 mmHg @ < 5.0% CO2 (at ATPS)Respiration: 3 -150 BPM