Big Power Ecig with Torch

Big Power ECig with Torch



Features:
1 Variable Voltage 3.0V~6.0V
2 Variable Watts: 3W-10W
3 Ultra-low quiescent current
4 Three-digital display tube
5 Battery low notices
6 Battery reverses protection
7 Amperage limiting system


User guide:
Assembly the battery and Cartomizer/atomizer with smoke juice correctly.

1. Power on and Smoking:
Press Button A (ON/OFF Button) above 3s till the LED on. Connect your Atomizer to Imotion3 then press button D to start smoking.

2. Function select:
Press button D 5 times to get into Function selecting manual, then press the button "B" or "C" to switch: "1. DR"-Display resistance, "2. DU"-Display Voltage, "3. DP"- Display wattage. Press button D again to get in the function.
2.1 Under the "1. DR"mode press the big button again, the resistant value of atomizer will be shown on the LED. If without atomizer connecting, LED will show F1.
2.2 Under the "2. DU"mode, press the button "B" or "C" to adjust voltage to a suitable value in a circle of 3V~6V, with 0.1 volt increments.
2.3 Under the "3. DP"mode, press the "B" or "C" button to increase or decrease of the wattage in a circle of 3P~10P, with 1watt increments.
2.4 LED indicator and protection.
When Imotion3 is working the LED will shows the voltage or wattage value which it actually be. Keeping pressing button D for 10 second Imotion3 will stop working.

3 Power record:
Imotion3 can record your favor voltage or wattage; Any button press will not be changed.
Press button "B" and "C" at the same time above 3 seconds to record current voltage or wattage. Press again Button "B" and "C" for 3 seconds to delete your records.
4 Battery check:
Press button A to check battery voltage (2.8V-4.2V) when power on.

Others:
1. Battery voltage less than 3.3V LED shows "Lo" and stop working.
2. Imotion3 max out put is 10W. If the setting voltage with atomizer has over the max out put, Imotion3 will keep the maximum out put, at this moment the working voltage will lower than your setting and shows on LED.

3. Single indication:
"o" Resistant value of atomizer (0.8Ω ~10Ω , +/- 0.2Ω ) resistant less than 0.8Ω LED shows "F2"
"U" Voltage value (3V~6V, +/- 0.2V)
"P" Wattage value (3W~10W, +/-1W)

"F1" open circuit
"F2" short circuit
"Lo" power low


Notices:
Please make sure you have well rigged up atomizer correctly.
Please make sure battery has enough power before smoking.
Imotion3 will release heating after keep on using for long time.
Please separate atomizer and Imotion3 when you are not using it.
Do not through the Imotion3 into fire or leave it in high temperature place.
No water proof product.