Stand-Alone Telecom Rectifier System

Quick Details1. Input: 48VDC2. Output: 220VAC3. Rated capacity: 5KVA-7KVA4. Used for telecom, utility and home use. 5. LCD display6. High efficiency >85%7. High frequency8. Power factor: 0.79. Off-grid type10. Two work mode: DC as mains and AC as mains11. Standalone type and 19inch rack mount typeIntroductionSETEC Stand-alone Telecom Rectifier System can offer dc power to communications system. It is high cost efficiency. It is consisted of rectifier module, controller module (also called monitor module), distribution and shelf. It's convenient to configure multiple modules as you like. DC power supply system is base on advanced rectifier modules. Each rectifier can offer high-power output 1400W (24V) or 1680W (48V). The controller module can manage the whole DC power supply system. There is large LCD on controller, English display. All the parameter and alarms can display on the LCDCharacteristicHeight: 4UHigh efficiency: 10% load, can reach up to 91%, 50% loads, can reach up to 97%Rectifier module: Weight: 2.4 KG, output current max 33A, continuous current 30AHigh performance and high reliabilityAC input: 185-300 VAC (if 85-185VAC must reduce the power). 48VDC output, power can reach up to 1680w24VDC output, power can reach up to 1400wForce wind coolingFront panel operation19inch standard rack mountingETSI standardRack mounting DC power supply system output current range: 30A to 330ASystem configuration is flexible and convenient, easy to expand; N +1 redundant power supply, can be configured according to customer demand. Digital signal collection via internal RS485 bus; RS232 interface for remote operation. 3 alarm dry contact alarm: Emergency alarm, main alarm, general alarm. Application1. Small scale program2. Controlled exchanges3. Access network4. Transmission equipment5. Mobile communication6. Satellite communication ground station7. Microwave communication8. Communications systemSpecification