UTS2010 Spectrum Analyzers

UTS2010 Spectrum AnalyzersSpecification: Frequency range: 9kHz to 1GHzFrequency resolution: 1HzFrequency reading accuracy: ± (Frequency scale reading× Frequency standard accuracy+1%× Sweep range+10%× RBW+0.5× Sweep range/(flying spot-1)]+1Hz)Internal reference(10MHz): Aging rate: <2ppm/year, temperature drift: <1ppm (15° CTO35° C)(RBW) Resolution band width (RBW)Range: 10Hz to 500kHz (1-10sequence), 1MHz, 3MHzSelectivity(60dB/3dB) &Accuracy: RBW≤ 500kHz<5: 1 typical value(digital implementation, next to Gaussian shape)<5% typical value(VBW)Video bandwidth: 10Hz to 3MHz, 1-3-10sequenceDisplay average noise level(DANL)Frequency100kHz: -90dBm; 1MHz: -125dBm100MHz: -122dBm500MHz: -122dBm1000MHz: -120dBmPhase noisFrequency offset 10kHz: -80dBc/Hz-90dBc/Hz-115dBc/HzSweep range: 100Hz≤ SPAN≤ 1GHz 10ms to 3000sZero sweep range: 1ms to 3000sSweep model: Continuity, singleOverall amlitude accuracy(90%) Input signal range: ± 1.2dBMax safe input level: Average continuous power+23dBmMax input DC voltage: 50VDCInput attenuator: , step to 1dB, 0-30dB, 1dB compression point: +7dBmThe three order distortion: >30MHz +13dBmThe two order distortion: +30dBmInput related stray signal: <-60dBcResidual responses: <-85dBmRF input/output: N type (50Ω )USB: USB 1.1(host), USB1.1(device)LAN: 10/100 Base-T, RJ-45connectorRS232: 9 pin D-SUB (positive)Reference input/output: 10MHz, BNC positive, output power 0dBm to +10dBm output power 0dBm± 2dBVGA: 640*480, 60Hz15 pin D-SUB(negative)GPIB: USB-GPIB option IEEE-488Demodulation: Headset jackInternal data storage: 128MBDisplay: 6.5 inch TFT LCDMax: 4 kgSize: 330(W)× 163(H)× 165(D)mmWork temperature: 0 ° CTO 40 ° C Storagetemperature: -20 ° C to 70 ° CPower: Input voltage range: 220VAC± 15% AC Frequency range: 40Hz to 60Hz consumption: 35W(max)