
CE Approved 120W COB LED Flood Light
- Payment Type:
- T/T, Western Union
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
Place of Origin: | Shenzhen China |
---|---|
Payment Type: | T/T, Western Union |
Product Description
Product Description
Features
1. US Bridgelux high-lumen Integrated Multiple LED Chip
2. Taiwan Meanwell Power Supply (UL approved), reliable and stable
3. Wide range of input voltage are optional: AC85-265V (normal) or AC85V-277V
4. Excellent thermal management
5. High quality multi-surface die-casting aluminum heat sink
6. Waterproof IP65 with tempered glass cover
7. Environment friendly and energy saving. Contain no mercury or lead. Consume 50%-70% less power than sodium light
Application
1. Projector of building
2. Tunnel Lighting / Pathway Lighting / Park Lighting
3. Workshop/Supermarket/Exhibition hall
Light Distribution Curve
Dimension
Package Information
Packing: 1pc/Carton
Packing Material: EPE cotton + double strength corrugated board
Carton Size: W42 * L48 * H20 CM
Gross Weight: 10KG
Attention
1. Pls read the product specification carefully, confirm the use environment is in line with the condition of specification, then can go ahead install.
2. Pls ensure the switch is in off state before the product connected to the power supply.
3. Lamps should be installed by qualified electrician, electrical wiring conforms to the IEE standards or national standards.
4. This product use both for indoor and outdoor.
5. Pls do not under the condition of voltage too high or too low for long-term use, it will effect the function of normal use and lifespan.
6. Not installed in the fuel for use, no matter in which situation, lamps can not be covered with insulating material or similar material.
7. When installation, replacemen, clean lamps, must cut off power supply ensure the personal safety.
8. When found abnormal work of lamps(self-extinguishing, flash), pls check the plug contact performance and power supply voltage is normal, if normal, fault has not ruled out, you need to change the new lamp.
9. Need to clean the surface of lamps, pls disconnect the power supply. Dry with soft cloth glued soapy water after cleaning, reoccupy does cloth to wipe, pls do not use banana oil wait to wipe the surface of lamps, also do not spraying the lamps of any chemicals, or lamps may discolor or damage.
10. Pls do not disassemable the product itself, so as not to damage the internal components. Removed by yourself can not enjoy the warranty service.
1. US Bridgelux high-lumen Integrated Multiple LED Chip
2. Taiwan Meanwell Power Supply (UL approved), reliable and stable
3. Wide range of input voltage are optional: AC85-265V (normal) or AC85V-277V
4. Excellent thermal management
5. High quality multi-surface die-casting aluminum heat sink
6. Waterproof IP65 with tempered glass cover
7. Environment friendly and energy saving. Contain no mercury or lead. Consume 50%-70% less power than sodium light
Application
1. Projector of building
2. Tunnel Lighting / Pathway Lighting / Park Lighting
3. Workshop/Supermarket/Exhibition hall
Light Distribution Curve
Dimension
Package Information
Packing: 1pc/Carton
Packing Material: EPE cotton + double strength corrugated board
Carton Size: W42 * L48 * H20 CM
Gross Weight: 10KG
Attention
1. Pls read the product specification carefully, confirm the use environment is in line with the condition of specification, then can go ahead install.
2. Pls ensure the switch is in off state before the product connected to the power supply.
3. Lamps should be installed by qualified electrician, electrical wiring conforms to the IEE standards or national standards.
4. This product use both for indoor and outdoor.
5. Pls do not under the condition of voltage too high or too low for long-term use, it will effect the function of normal use and lifespan.
6. Not installed in the fuel for use, no matter in which situation, lamps can not be covered with insulating material or similar material.
7. When installation, replacemen, clean lamps, must cut off power supply ensure the personal safety.
8. When found abnormal work of lamps(self-extinguishing, flash), pls check the plug contact performance and power supply voltage is normal, if normal, fault has not ruled out, you need to change the new lamp.
9. Need to clean the surface of lamps, pls disconnect the power supply. Dry with soft cloth glued soapy water after cleaning, reoccupy does cloth to wipe, pls do not use banana oil wait to wipe the surface of lamps, also do not spraying the lamps of any chemicals, or lamps may discolor or damage.
10. Pls do not disassemable the product itself, so as not to damage the internal components. Removed by yourself can not enjoy the warranty service.
Related Keywords
Related Keywords
You May Also Like
You May Also Like