220V Single Learning Remote Switch (RYC-RK01S)

220V single learning remote switch RYC-RK01S manual

I. Features:
1. Two-wire design, can be controlled by remote control lights on and off two kinds of functions;
2. Mainly used: Lighting remote areas (which can be accessed incandescent, energy saving lamps, fluorescent lamps, etc. Combined class) or industrial control.
3. The use of single-chip learning coding techniques, can learn any type of oscillation resistance 315MHz 3.3M-4.7M remote, self-learning code, easy to configure the remote control.
4. Size: 55X42MM, can be used to control high power lamps and equipment.
5. Receiver sensitivity, remote control distance of up to 50-100 meters or more.
6. Using wireless coding technology, no direction, switches without disturbing each other;

Two. Learning settings
1. Learning be cleared before operation: Press the button to learn (ie, the touch of a button on the controller) more than 5 seconds, then lights from off to bright to light off, which means that all the learning remote control to delete (clear operation complete).
(2) learning methods: First, by manually lights, and then hold down the button to learn about three seconds off the lamp by the light becomes brighter and then let go, which means that enters the learning state.
3 Press any key on the remote control until the lamp flashes then release, which means that success in learning. Otherwise it should be re-learning.
4 was equipped with remote control: Repeat the above steps can learn up to 12 remote control. Over 12, the first one is deleted.
Third, the wiring instructions:

N, L is an input terminal, connected to 220 volt power supply
No. 1 terminal of the relay normally open sub-
No. 2 terminals for the relay common terminal sub-
The 3rd son of the relay terminal normally closed terminal
To control lighting or appliances, fixtures or electrical circuit requires only a one in a line (such as Firewire or zero line) cut, will cut two heads connected to the normally open and normally closed and common or can be carried out on the public side remote control.

Our main products are wireless remote control switch, infrared remote control switch, remote control switch 220 volt, 12 volt remote control switch, 24 volt remote switch, 86 wireless remote control switch panel, remote motor reversing remote control switch, infrared remote control socket, infrared remote control switch, etc.; Remote control are: Push the cover remote control, a small four-button remote control, peppers remote control, waterproof remote control, Buick remote control, remote control cat, slim remote control with base metal remote control, remote control panel 86, 1000 m remote control, 3000 meters remote control, power remote control, etc.; Receiver module are: Normal 5 volts receiver module, 3 V low-power receiver module, decoding receiver module, learning code receiver module, scroll receiver module, superheterodyne not receiver module with decoder, superheterodyne receiver module with decoding, firing head, coding launch first class, the other according to customer requirements design and produce all kinds of wireless remote control products (including dimensions, functions, etc. ).

It can be widely used in remote control switch, remote control, remote control socket, remote control LED, remote stereo, remote control electric doors, garage door remote control, remote control retractable doors, roller shutter remote control, remote control parking lock, parking lock remote control, remote control curtains, alarm host, alarm, remote control motorcycle, electric car remote control, remote control MP3, remote control lights, remote control cars, security and other remote areas of civil and industrial facilities, as well as remote control and other industrial motor reversing remote areas, with easy installation, simple to use, safe and reliable and so on