DC12V/24V 2 Channel Wireless Rolling Code Gate Opener Kit (RYC-2-202-004)

Quick Details
Place of Origin: Guangdong, China (Mainland)
Brand Name: Rely
Model Number: RYC-2-202-004
Operating Voltage: DC12V or DC24V
Operating Frequency: 315, 433MHz
Size: 75*54*27mm
Weight: 59.5g
Encoding type: Fixed code, learning code, rolling code
Working distance: Sensitivity: >105dBm
Vorking current: 7mA
Packaging & Delivery
Packaging Details: 300PCS/box; Carton size: 48*38*25cm
Delivery Detail: 7-15days
Specifications

Store 32-200 PCS of differents remote control
Operating Voltage: DC12V/24V
Standby Current: 7mA
Operating Frequency: 315/433M

DC12V/24V Wireless Control Receiver For Forward Reverse Motor Control
2 Channel Wireless Rolling Code Gate Opener Kit
It's learning type and can store 32-200 PCS of differents remote control.
Its input voltage adopt 12V or 24V DC (can be choose on the board).
It can match with our 1/2/3 buttons of remote control as a complete subassembly to implement the motor F/R (forward or reverse) rotation or switch on/off shift of equipment controlled. It is widely used in industrial control, garage door, dumpcart, lift, light control etc.

Technology Parameter:
Operating Voltage: DC12V or DC24V
Standby Current: 15mA
Operating Frequency: 315, 433MHz
Frequency Deviation: 0.2MHz
Operating Temp: -40C~+60C
RF Sensitivity: >-103dBm
Output Voltage: DC
Modulation Mode: ASK

Operation instruction:

1. The receiver can store 32PCS remote controls at most, if you want to learn more remote control when the memory is full, the new remote control will instead of the first remote control.

2. LEARNING CODE:
Hold the learning button on receiver PCB, then press any button of remote control when the LED of receiver flashes 4 times, which show you have learnt the remote control into the receiver, then release both buttons, now it is monostable mode. If you need to set bistable mode, after you learning the remote control into the receiver, keep holding the learning button on receiver, then press any button of remote control again when the LED of receiver flashes 4 times, now it is bistable mode.

3. DELETING FUNCTION:
Press the learning button on receiver for 10 times continously and the LED on receiver will flash 10 times, now all codes will have been deleted.