Digital High Accuracy Coating Thickness Meter, Gauge 0-1300um/0-51.2mil+Built-in F&Nf Probe (CCT01)

CCT01 coating thickness meter conquers the difficulties of non-destructive measuring of coating thickness on both magnetic and non-magnetic base that can be used on many applications even on applications that require greater precision. It is the most advanced and top quality rugged meter that uses magnetic induction and eddy current principle to measure thickness of magnetic coating on nonmagnetic base as well as nonmagnetic coating on magnetic base. Lightweight and equipped with BUILT-IN F & NF probes it carries out high-speed and accurate results on either single or continuous measuring mode and covering a wide range of 0-1300um or 0-51.2mil. 

The F probe (Magnetic Induction) measure the thickness of non-magnetic coating layers on magnetic substrate and mostly used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminum tile, some alloy tile, paper and many other materials such as*aluminum, chrome, copper, enamel, rubber, lacquer, dye, powder, varnish & paint on magnetic substrate like steel, iron, nickel, alloy and magnetic stainless steel. While 
NF probe (Eddy Current) measures the thickness of nonconductive coating layers on non-ferrous substrate and most often used on anodizing, varnish, paint, enamel, plastic coatings, and powder applied to either aluminum, brass, non-magnetic and stainless steel such as*enamel, rubber, pain, varnish, plastic anodic-oxide layer covered on non-ferrous substrate like aluminum, brass, zinc, tin and non-magnetic stainless steel.
Reap the versatility benefits of wireless CCT01. Simple, durable, accurate and versatile device that have a more refined & functional performance!
Feature:
* 128*128 dot matrix LCD display, standard menu operations;
* Two group mode: direct (DIR) and general(GEN), readings will be lost when power off in direct mode, and not be lost in general mode. 80 readings can be stored for each group;
* Zero point calibration and multi-point calibration(up to 4 points) for each group
* Statistics display: mean, minimum, maximum and standard deviation;
* User can recall, delete specified readings, or delete group readings;
* Two measure mode: single and continuous;
* Three probe mode: auto, magnetic and eddy current;
* User can set high or low limit alarm for each group;
* Power off automatically;
* USB interface to data transmission;
* Low battery and error indication
Specification:
* Measuring principle: Magnetic induction (F-probe) and eddy current (N-probe);
* Measuring range: 0 to 1300um (0 to 51.2mils); 
* Accuracy: ± (3% of readings+2um); ± (3% of readings+0.078mils); 
* Resolution: 0um~999um (1um), 1000um~1300um (0.01mm);
              0mils~39.39mils (0.01mils), 39.4mils~51.2mils (0.1mils); 
* Calibration: One to four point calibration, zero calibration; 
* Data Group: One direct group (readings not be stored to memory), four general group (readings can be stored), and each group have individual statistics, alarm settings and calibration; 
* Statistics: No. of readings, mean, minimum, maximum and standard deviation; 
* Units: um, mm and mils; 
* Alarm: User can set the high/low alarm, and alarm icon displayed on LCD when over the limit; 
* Minimum curvature radius: convex 1.5mm(59mils) and concave 25mm(984mils);
* Minimum measuring size: Diameter 6mm(236mils);
* Minimum thickness of substrate: F-probe: 0.5mm(0.02"), N-probe: 0.3mm(0.012");
* Computer interface: Download data via USB interface;
* Power supply: Two 1.5v AAA battery;
* Operation temperature: 0°C to 40°C(32°F to 104°F);
* Storage temperature: -20°C to 70°C(-4°F to 158°F);
* Size: 110mm*53mm*24mm (4.33"x2.09"x0.94");
* Weight: 92g (3.24oz)