50 Floors Lift Elevator Controller Board

This I/O module can be applied in controlling middle and high level lift and elevetor. By using this I/O module, The estate management company or management personnel can manage the Entry/Exit of all people more effectively and safer. It can effectively control the Entry/Exit of people without fixed duties. All card holders must be authorised by the system administrator. While using this I/O module, different people has different rights. After authorisation, the authorised people can enter the appointed area or floor. Unauthorised people cannot enter. It can also authorise according to the time table. Whether it is operated online or offline, it can save a lot of records. So that all the entry/exit records can be checked.



Each I/O module can control 50 layers, plus a emergency input port. If over 50 layers, use more modules.



Function Introduction

Time Zone Control Function: Each layer can be controlled according to time zone. There are 4 time zones every day. Different people can enter different layer (at most 13 layers) at pre-setted time zone. VIP cardholder can enter all layers without time zone limit.
Large Users Capacity Function: It can register 8192 users and keep 32768 records. The records can be kept for 100 years even failure power.
Multi-input Function: It can support many Wiegand format (26bit, 44bit) and connect with RF ID/IC reader.
Holiday Setting Function: It can preset 30 holiday. During holiday, the time zone can be set different non-holiday.
Offline Operated Function: It can operate offline via PC setting.
Communication Function: RS485, RS422, RS232
Networking Function: Each module has its sole address code (at most 254 address). If there are many building, then use RS485
Choose layer function: Corresponding relay start out when the cardholder swipe the legal card. Then press layer number. The time between card reading and button press can be set via PC.
No card operation function: Allow legal users to operate without card, while using ID number + password.
Encrypt Function: If the layer someone enter is during encrypt time zone, Users have to press button after entering password and card reading. The time between card reading and entering password can be set on PC.
Expansion function: If over 50 layers, then use 2 or more modules to share the one reader. The layer can be expanded.
Emergency input function: When firefighting input, if all layer is normal open or normal close can be preset via PC.
Layer Open Function: Some layer can be set as public open layer, where everyone can enter without register.
Remote Call Function: When guests are coming, the host can call from remote distance by pressing Call Button (1~37 layer) at home. When guests enter the lift, just press the appointed layer to arrive.
Retrieve Function: When the equipment failure, just powered off. Then the equipment can retrieve the state everyone can oeperate.