Round Tracing Cable Duct Rod/Diameter From 4.5mm, 6 Mm to 16mm

Round tracing cable duct rod/Diameter from 4.5mm to 16mm
Cobra Snake Continuous Fibreglass Duct Rod, Cable Duct Rods, Fiberglass Rod Cable


For more information, contact Nancy Liu
Tel: 0086 15118174252




Application
1. Used to install pulling ropes and winch ropes into ducts, ready for cable pulling operations.
2. Fiberglass rod is lightweight and flexible.
3. Dia of duct rod: 4.5mm; 6mm; 8mm; 9mm; 10mm; 11mm; 12mm; 13mm; 14mm; 15mm; 16mm
4. Length of pulling rod: 100m/ 150m/ 200m;




Fiberglass cable duct rods

Product Introduction of Fiberglass cable duct rods

Duct Rodder applies in tow leadrope through a pipe, it is auxiliary means. Surface smooth and high resilience, so the FRP
Perforator with ease passes the narrow channel. Perforator consists of two parts: The glass fiber strengthen the level, the
High-pressured low density polyethylene protective layer(smooth, firm, can resist the adverse circumstance). It has time
Saving reducing effort, improving efficiency, etc.

And Duct Rodder can be used for telecom cables, cable pipe and cleaning and plastic pipe of cloths to put. When use draws out the FPR
Pole by the pulley, then with a corresponding metal joint, penetrates in the pipeline. When cleaning, guidehead will drive
Cleaning tools to clean the pipe; When arranges the cable, you may first leads the steel wire or the iron wire, then enters the
Pipe with the steel wire or the iron wire hauling cable.

A. The Fiberglass cable duct rods type
Duct Rodder Dia from 4.5mm to 18mm. The longth of fiberglass rod from 50 meter to 500 meter

B. Fiberglass cable duct rods features

1. Strong non-conductive fiberglass rod construction
2. Stainless steel drawing head
3. For longer conduit runs and underground duct
4. Rugged tubular steel reel with adjustable position.
5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod.
6. Duct rods/duct rodders have Many applications, not only pulling the cable but also pulling electric tools, and it repair is
Very easy, and available.




Our main products as below:


FUSION SPLICER:
COMWAY C10
Sumitomo (Type-81C/39/-66/); Type Q101-AC
Fujikura (fsm-60S/60R); 70S, 70R, 80S
Fitel S178A;



OTDR:
EXFO (FTB-1/AXS-110/AXS-100/ FTB-200/FTB-500);
JDSU (MTS-2000/4000/6000/8000);
YOKOGAWA (AQ7275)
HSV-600


POWER METER (PPM-350c, FPM-300, HSV300-P);
LIGHT SOURCE (FLS-300, HSV300-L);
VFL (FLS-241, HSV-321);
Multi Loss tester (FOT-930, FOT-302)

4. Anritsu site master S331D, S331L, S331E, S332E.
5. Fiber cleaver (CT-30A/FC-6S), adapter, battery, electrode, connector, fiber tool kits
6. Fiber cable, patch cord, adapter, closure, pigtail, optical switch, patch panel, etc...
7. Maintainance and repair, calibration service for the EXFO, Sumitomo, Fujikura, Anritsu.