CDMA Q2438f/J Modem, RS485, RS232, USB2.0 Interface Optional, Dualband 800/1900MHz

Specifications

1. WAVECOMq2358c&q2438f/j module CDMA 800/1900MHz
2. CDMA2000 1xRTT and AMPS technology.
3. Core processor ARM7
4 factory price




High quality of CDMA Modem Q2438F dualband 800/1900MHz for bulk SMS sending, Support TCP/IP, OPEN AT, VOICE CALL, FAX, SMS, DATA etc SERVICE


Choose Right
Be Global
By using interchageablity with GSM/GPRS Q24XX platforms.
Be Thin
By embedding a small, but a very powerful CDMA module into your size sensitive apllication.
Be Smart
By using the Q2438 which supports AMPS, gpsOne, BREW and USB all in one. And by intergrating gpsOne for vehicle security, fleet management, and asset tracking.
Be Complicant
By choosing wavecom carrier certified solutions, meeting al your hardware, software, and services needs.

General specifications:
1. Operating voltage: 3.8 V to 4.2 V (3.7 nominal)
2. Max. Output Power: 0.63W AMPS; 0.35W CDMA
3. Current consumption:
1)4 ma(Sleep),
2)Up to 670 MA(PCS RX/TX full power)
4. Freqnency bands:
1)CDMA Band Class 0 (Cellular 800MHz Band)
2)CDMA Band Class 1 (PCS 1900 MHz Band)
3)AMPS(Cellular 800MHz Band)
4)GPS One (L1 1575.42 MHz Band)

Mechanical:
Overall Dimensions: 20*20*10cm
Gorss weight: 0.5 kg

Interfaces:
1.60 pin board to board connector providing:
1) Up to 2 serial UARTS
2) USB (external transceiver required)
3) 2 Analog audio (mic+speaker)
4) 3 V with R-UIM detection (5V with external level shifter)
5) Power supply
6) 1 ringer/buzzer output
7) Keypad (5*5 matrix)
8) ADX
9) 31 GPIO
2. Antenna:
U. FL Connector

Environmental:
1. Operating Temperature: -40 to 80 centigrade
2. Storage Temperature: 40 to 80 centigrade
3. ISO TS 16949 manufacturing

Compliance:

1. IEC950, UL950
2. FCC Part 15B power supply, conducted requirements only,
3. FCC modular approval. FCC ID: 09EQ2438F-M
4. CSA for Canada, Canada IC-133
5. CDG1, 2 (IS-98D, IS-898)and 3(application specific)

Carriers Certifications
Q2438 is continuously being approved at all major CDMA operators worldwide.

Software Specifications
1. CDMA 20001*RTT Protocol
2. IS-95A/B: CDMA Protocol
3. IS-637: Short Message Service
4. IS-707-A. 4: Async data service, G3 Fax Service
5. IS-707-A. 5: Packet Data Service
6. J-STD-008: PCS Protocol
7. IS-96A: Voice Signal Coding
8. IS-99: Circuit -switched data, Faz
9. IS-657: Packet Data
10. Over the air-EIA-683A-OTASP, OTAPA
11. IS-733 and IS-127: TTY/TTD
12. Built-in TCP/IP
13. Cellemetry
14. Multiplexing(AT command set)
15. DMSS SSL encryption
16. Carrier support (Caller ID, Call Forwarding, Call Waiting, 3 way calling, Air-link dormancy)

Development Kit

1. Interface Board
2. Q2438 Module
3. Serial cable
4. Standard handset+ cable
5. Antenna and RF Adapter Cable
6. Power supply
7. Documentaton on CD ROM