Vertical Fan Coil Unit for Water Chiller or Heat Pump

Vertical Exposed Fan Coil Unit
Specifications
Vertical exposed fan coil unit:
With CE certificated
Coling capacity: 1.8KW to 12.6KW;
Heating capacity: 2.7KW to 19KW;

Jinhuali is a professional factory which specialized in refrigeration euquipment, such as fan coil units, water chiller and heat pump.

Vertical exposed fan coil unit
1) Structure of series product: Units have been designed for both vertical and horizontal positioning
2) Air volume: 34, 51, 68, 102, 125 and 150
3) Electric source: 230V, 1PH, 50/60Hz
3) Structure for switch: Manual, electrical and three-speed switch
5) Hydraulic terminals are supplied accompanied by plastic envelope fixed to the top of hydraulic terminal containing
6) Instruction manual
7) Guarantee certificate
8) Can be use remote handset and wired wall pad
Fan Coil Unit
1, Exquisite Structure, pleasing in appearance, reasonable product structure, fire insulation.
2, It has the fine design, light weight and good strength, also easy installation.
3, The effiency is high. Fan coil adopt seamless red Copper Pipe and aluminum blinds-fin. Mechanical expand tubes make sure the Close contact between fin and cooper pipe, reaching he best heat transfer. Before leaving factory strict test is done, so is the 100% pressure leak testing (20 kg/cm2 pressure leak test), to ensure product quality and performance.
4, It is easy to control and owns complete functions.
5. Ceiling Exposed, Ceiling Concealed, Floor Mounted, Cassette type for optional.
Specifications


OPTIONAL
L Condensation tray (water connection area)
L Different type thermostats with more advanced functions
Application:
Fan coil units is the indoor terminal units of the air conditioning system, . Applicable to hotels, villas, hospitals, cinemas, stadiums, recreations, office blocks, factories and so on.
Note:
1. The noise value is tested in all the mute indoor, under norm operation condition, the measuring point is 1 meter away in front of the unit and 1 meter below the unit.
2. Cooling capacity is tested under: Air inlet DB=27° C, WB=19.5° C, intake water temperature=7° C, outlet water temperature=5° C, and 3 column coil.
3. Heating capacity is tested under: Air inlet DB=21° C, intake water temperature 60° C, same water flow condition as testing cooling capacity, and 3 column coil.