Dimmable IR Remote LED Controller (TC-CT302D)

Features of Dimmable LED Controller, LED Dimmer Remote Controller

CT302D is a multi-function Touching LED Controller. It adopts the most advanced PWM remote control technology, can control all the full color LED lighting with Three lines two circuits(common anode), with 50 grades of brightness adjusting.

Specification of LED Strip Remote Control

Technical Parameters(Remote Control)
1. Power supply: AAA battery× 3PCS
2. Cover Material: ABS
3. Fabrication processing: Multicolor printing & UV varnish

Technical Parameters(Controller)
1. Working voltage: DC12V/24V
2. Output control: 2 channels
3. Control current: 6A/channel
4. Connecting method: Common anode
5. Wireless frequency: 433.92MHz
6. Receiving range: 20meters

Functions of Keys
1. Key 1: On
2. Key 2: Off
3. Key 3: Highest brightness
4. Key 4: Medium brightness
5. Key 5: Lowest brightness

How to use
1. Use your finger to touch the color ring, you can change the brightness from the highest to the lowest (100%-1%, 50 grades to adjust).

2. Resume function
The previous settings will be resumed while power on again.

3. Matching code
Press Key 3 once within 3 seconds when power on again, the light will blink 3 times if matching is successful.

4. Clearing Code
Press Key 3 five times within 3 seconds when power on again, the light will blink 6 times if clearing is successful.

Caution
Please don't touch or press the color ring while loading the batteries to protect the sensitiveness. Please use the remote controller 3 seconds after the batteries are loaded. Please reload the batteries when you find the color ring is not sensitive.

Safe instruction of LED Controller
Attention! Operate Carefully! Please read the following tips carefully.

1. Don't install the product in areas with thundering, strong magnetic and high pressures.
2. Make sure the connection is right and firmed in case of fire accident caused by short circuit.
3. Please install the controller with ventilation to make sure the temperature is appropriate.
4. Please check whether the input voltage, power supply (constant pressure) accord with the requirements.
5. Please don't connect the power before connection.
6. Please contact the supplier when problems occur. Don't maintain by yourself.
7. The Instruction is for this Item Only, no notification if any amendments.