Wireless Touching Remote RGB LED Controller (TC-CT302RGB)

Features of Wireless Touching RGB Controller
CT302 is a multi-function Touching RGB LED Controller. It adopts the most advanced PWM remote control technology, can control all the full color LED lighting with four lines three circuits(common anode), with more than 640000 combination colors and 15 auto light changing modes.

Specification of Touching RGB Controller

Technical Parameters(Remote Control)
1. Power supply: AAA battery× 3PCS
2. Cover Material: ABS
3. Fabrication processing: Multicolor printing & UV varnish

Technical Parameters(Controller)
1. Working voltage: DC12V/24V
2. Output control: 3 channels(R/G/B)
3. Control current: 6A/channel
4. Connecting method: Common anode
5. Wireless frequency: 433.92MHz
6. Receiving range: 20meters

Functions of Keys
1. Key 1: On/off
2. Key 2: Light changing mode(15 modes)
3. Key 3: Color light/white light switching mode
4. Key 4: Turn up(brightness/speed)
5. Key 5: Turn down(brightness/speed)

How to use
1. Press Key 1 to turn on/off in any state.
2. Press Key 2 to activate light changing mode, a new mode each press, 15 modes in total.
3. Press Key 3 once to activate white light mode, changing brightness by pressing Key 4/Key 5. Press Key 3 twice to activate color light mode, changing brightness by pressing Key 4/Key 5 or changing light color by touching the color ring.

Resume function
The previous settings will be resumed while power on again

Matching code
Press Key 4 once within 3 seconds when power on again, the light will blink 3 times if matching is successful.

Clearing Code
Press Key 4 five times within 3 seconds when power on again, the light will blink 6 times if clearing is successful.

Caution
Please don't touch or press the color ring while loading the batteries to protect the sensitiveness. Please use the remote controller 3 seconds after the batteries are loaded. Please reload the batteries when you find the color ring is not sensitive.

Safe instruction
Attention! Operate Carefully! Please read the following tips carefully.
1. Don't install the product in areas with thundering, strong magnetic and high pressures.
2. Make sure the connection is right and firmed in case of fire accident caused by short circuit.
3. Please install the controller with ventilation to make sure the temperature is appropriate.
4. Please check whether the input voltage, power supply (constant pressure) accord with the requirements.
5. Please don't connect the power before connection.
6. Please contact the supplier when problems occur. Don't maintain by yourself.
7. The Instruction is for this Item Only, no notification if any amendments.