1 Channel 180W 1~10V LED Dimmer

Features of 1-10V LED Dimmer
1.1channel, max. 8A
2. No flicker, 1-10V dimming
3.1024 Grayscale, smooth dimming


Specifications of LED Dimmer 24V
1. Input: DC12-24V
2. Output: <8A
3. Power: 180W
4. Controlling signal: 0/1-10V
5. Frequency: >500kHz
6. Weight: 220g
7. Packing: 1*48(L364*W334*H158mm)

Product Operation
1. A way, choose the light SWITCH panel (often a panel SWITCH mode), Must first interface (SWITCH DIM) with cross line short answer

2. Switch for single press on and off states, switch machine have memory And brightness delay bright or dark function. Do the light switch instantly light up to Or destruction

3. Switch on time long, plus or minus brightness state, in the process of long Press stop, in 2 seconds again continue long press, so will remain the last time the State of brightness, if is over two seconds long press again, then brightness will be Opposite state control (example: The current dimmer outfit state is added Brightness, when transferred to 50% brightness stop, if in for about 2 seconds Long press again, then once again from 50% brightness, and will continue to add Up from 50% brightness minus)

4. Way two, choose external active 0/1-10 V or passive signal control, must Take jumper in (SWITCH DIM line disconnect) press product connection diagram, Adjust 0/1-10 V dimmer switches, which changes the output of the controller, until They get the satisfactory LED output brightness so far

5. [Analog IN ]port impending, controller all light output; When the[ Analog IN ] port two terminals short circuit, the output shut down.

Note:
1. Please choose to surge of smooth curve 1-10 V dimmers, otherwise may directly affect the smoothness of the LED light