Pure Stainless Steel Battery Compartments Caravela Mod Mechanical

Features include:

22mm Diameter.
Body and Extension Tubes - Polished "Phantom" Brass. Consists of Aluminium, Brass and Copper wihich improves Conductivity, Colour and Texture.
Top Cap - Polished "Phantom" Brass with Stainless Steel Wrap.
Bottom Cap - Polished "Phantom" Brass with Polished 304 Stainless Steel Lock Ring
Lock Ring with 3 Entry Threading for One Locking Motion
Can Accommodate 18350, 18490 and 18650 Batteries with Included Extension Tubes
Silver Plated Copper Contacts
Floating Positive Pin
Adjustable Magnetic Firing Button and Contacts
Fine (0.5mm) and Smooth Threading
Low Voltage Loss
Huge vaporizer mechanical e cigarette mod Caravela, Caravela mod, caravela clone

Main features for Huge vaporizer mechanical ecig mod Caravela, Caravela mod, caravela clone:

1. Full detachable, all mechanical switch
2. No wire solder, no welding
3. Pure stainless steel body, high quality
4. Fit with 18350, 18490, 18500 and 18650 battery, very flexible
5. With switch on the bottom side, easy to press

Caravela Mod Facts and Features;
Caravela Signature Ship Logo on All 3 Battery Tubes
Signature Caravela 'C' Logo on Stainless Steel Button
Signature "Pedro" Logo on All 3 Battery Tubes
Unique Serial Number on Stainless Steel Button Housing
100% Brass or Stainless Seamless 18350 Main Body Tube
100% Brass or Stainless Seamless 18500 Main Body Tube
100% Brass or Stainless Seamless 18650 Main Body Tube
100% Brass or Stainless Top Atomizer Cap and Locking Ring
Silver-Plated Positive and Negative Contact Pins
Reverse Threaded Locking Ring
Internal Button Switch and Spring
Recessed 510 Atomizer Connection
Adjustable 510 Contact Pin w/ Black Delrin
22mm External Diameter


General Tips
Always Insert the Positive Side of the Battery into the tube FIRST! So if your mod was sitting on a table, the positive side of the battery would be facing up and the negative side of the battery should be facing down towards the button (Just like any mod, failing to properly insert your battery will kill your mod)
Always Use Protected Batteries from Reputable Brands Such as AW, MNKE and eFest. Failure to Use These Batteries Can Result in Explosion and/ or Severe Incorrect Fitment. If your mod is not firing and you ARE NOT using correct batteries.
Always use a mod safety fuse when running unprotected batteries which should be purchased on our site
Never stack batteries
Prior to using your mod, we suggest cleaning the contact pin, firing pin, tube threads, as well as the inside of all of the tubes. To clean simply remove the contact pin from the mod and thoroughly clean the contact pin, firing pin, threads, and inside of the mod tubes with a microfiber towel and standard rubbing alcohol to remove the manufacturing oil which will decrease the conductivity (aka decrease the resistance/drop voltage)