100m Cat5e VGA Extender (100m/200m/300m optional, YLC-3501)

VGA Extender by single cat5e UTP cable 100m, 200m, or 300m(3 versions).This model include one Sender and one Receiver.It distributes 1 VGA input to 1 VGA display over a distance of 100/200m/300m meters away without any signal loss by a UTP CAT5 cable.It is a cheap solution for VGA extension as CAT5 cable is very cheap cost.It supports high definition up to 1920*1200.Our VGA extender include ligtning module which can help you to install them on most of outdoor projectors.

Features
- 1 channel VGA+AUDIO input;
- 1 channel VGA+AUDIO output;
- Connect a PC host in and 1 CRT PC monitor or LCD over 100m, 200m, or 300 meters away;
- USB power supply and 9V DC power supply input port for transmitter;
- 12V DC power supply for receiver;
- Transmission Media:UPT CAT5 Cable;
- Bandwidth:DC125MHz;
- Differential coefficient plus<0.5%;
- Differential coefficient plus< 0.5?
- SNR:60dB

Transmitter:
1.Connect VGA signal (to be send) to VGA IN
2.Connect audio signal (to be send) to AUDIO IN
3.Connect power supply plug to transmitter??S POWER
4.5 reticle RJ45 Insert TP-OUT
5.Setup all K is shut.Please make switch is ON (when transfer distance > 200m)

Notice:Setup position of switch K must based on transfer distance and image effect., still don??T satisfy image contrast after contrasting.Please setup switch K is ON

Receiver:
2 VGA displays can be connected at the same time.But the lighteness will reduce when 2 displays are connected in.Please adjust the contrast, brightness, color.

1.Connect display input to VIDEO-OUT
2.Connect audio output to AUDIO-OUT.
3.5 reticle s RJ45 Insert TP.

CAT5 Cable:
CAT5 Cable should be parallel, can not appear cross over in twisted-pair.Seriation as follow:White orange / orange/ white green/ green / white blue / blue/white palm / palm.

Receiver adjustment:
Make the image look better via BRIGHT / CONTRAST adjustor
Still do not satisfy with the imagecontrast after you adjusting, please setup all switches K of receiver are ON
Lighteness, contrast, and switch K is OK for 300M transfer distance when leaving factory.