Full Spectrum Marine Reef Intelligent Control LED Dimmable Aquarium Lighting

1, Both photo synthetic SPS and LPS corals flourish under its precision lighting environment. Exclusively developed for SPS reef aquariums and other high intensity applications.
2, High Intensity USA CREE™ XLamp® Emitters for more fluorescence and increased color enhancement in your corals.
3, Stylish contours make this light aesthetically pleasing.
4, The fixture is controlled by the LCD side mount and wireless remote control. Fully programmable, 4 channels for controlling four colors separately, allowing the ability to control, dim and time the LEDs for a full 12 & 24 hour dawn to dusk photo cycle.
5, LEDs: USA CREE™ XLamp® . There is 12 LEDs in each interchangeable pad. There is 3 pads.
USA CREE™ XLamp® LED Color: CREE XT-E Cool White, CREE XT-E Warm White, CREE XP-E Blue, and Super Actinic Blue.
6, Watts: Energy Efficient at 108 watts, but at the same time offers superior light output.
7, Dimensions: 23.75" x 10" x 2" (L x W x H)
8, Kelvin Rating's: 16K-18K
Specifications Continued...
1)400 PAR Value at 24 inches: Good penetration for aquariums up to 24 inches in depth.
2)Weight: 7 lbs.
3)Chassis & Frame Materials: Rust Proof Oxidized Aluminum & Rust Proof Oxidized Titanium.
4)Cooling / Airflow & Noise: Incorporates a unique passive cooling system, along with long life dual ball bearing quiet fans (which means they won't die or become noisier while slowing down), to keep the unit running optimally. These high quality fans are rated to run for 70, 000 hours (8 YEARS! ). The fans work in conjunction with a built-in internal thermostat, and will only kick on when and if the temperature exceeds 120° Fahrenheit. Also each USA CREE™ XLamp® 12 LED Pad has a separate internal heat-sink, to extend the life of the diodes. Furthermore the diodes are mounted on an all aluminum circuitry board, which is an excellent conduit material that allows dispersion of heat.
5)Interchangeable LED Pads: These units are designed to be modular, so that you can change the color pad, if needed, to accomodate a particular aquarium set up, for example a freshwater planted aquarium may choose to run a LED pad with Green and/or Red LEDs. For a coral reef aquarium a 12 LED pad consists of (4) 470 Nanometer Blue, (2) 420 Nanometer Blue, (4) 6, 500 Kelvin White, and (2) 10, 000 Kelvin White.
6)Warranty: All products are warranted for 2 years against manufacturing defects covering repair. The diodes are covered for three years. During this period, in the rare event should a problem arise, we will repair or replace the defective unit or part at our discretion. In the unlikely event should an LED burn out, send that burned out LED pad to us, and we'll send you a replacement, free of charge. Truly plug and play...No modifications required...Just unscrew and unplug your old component and replace it with a new one and/or an upgraded component...
7)Optics: The optics are 90 degree optics which focuses the light beam into a 90 degree angle and thus directs all the light down instead of losing some light to outward projection.
8)Mounting: Optional wire hanging kit with convenient brass fittings, and slide-on legs, both included.
9)Shunt Protection: Includes shunt protection tubes (leap circuits). In the unlikely event should one CREE LED burn out, the rest of the CREE LEDs keep on running. One open circuit (blown LED) can cause an entire LED string to go dark leading to costly results. Because shunt protectors are added, this allows the healthy LEDs in the string to remain illuminated by shunting current around the inoperable LED. Since your expensive corals require an LED lighting application that is highly stable and has reliable functionality, you can now see the added benefit of shunt protection tubes. In conclusion it will keep the rest of your LEDs running until you are able to get that one burned out LED replaced.
36x3w dimmable 108 watt led aquarium lighting